Blog

Stokbord Cable Protection For HVDC High Voltage Interconnector Cables

By Chris Dodds on 21st February, 2014

Stokbord cable covers were specified by main contractor ABB to protect all onshore elements of the EirGrid East-West Interconnector, a high priority European infrastructure project to enable the cross-border transportation of extra high voltage power... Read More - Stokbord Cable Prote...

Category:  Cable Laying & Cable Pulling

11kV Cable Lugs

By Chris Dodds on 20th February, 2014

11kV Cable Lugs. T&D stock Cembre 11kV cable lugs. Cembre 2A range of 11kV cable lugs are suitable for the cable crimping and cable termination of 11kV stranded copper cables. Cembre range of 2A high voltage copper crimp lugs are suitabl... Read More - 11kV Cable Lugs ...

Category:  HV Cable Jointing & Terminating

11kV Cable Lugs For Terminating High Voltage Cables

By Chris Dodds on 20th February, 2014

11kV Cable Lugs. Careful and equal attention should be afforded to the selection of 11kV cable lugs when terminating high voltage cables with stranded copper conductors, this includes 11kV BS6622 and BS6883 cables. Often installers spec... Read More - 11kV Cable Lugs For ...

Category:  HV Cable Jointing & Terminating

Sicame Hepworth ML4 Mechanical Connectors - 11kV Triplex Copper Wire Screen 35sqmm Termination Lugs

By Chris Dodds on 20th February, 2014

Sicame Hepworth ML4 Range Of Mechanical Connectors 11kV Triplex Copper Wire Screen 35sqmm Termination Lugs   Sicame Hepworth mechanical brass cable lugs are preferred by high voltage cable jointers for terminating the 35sqmm copper... Read More - Sicame Hepworth ML4 ...

Category:  HV Cable Jointing & Terminating

Cembre Cable Lugs - A & 2A Ranges Compared

By Chris Dodds on 20th February, 2014

Cembre Cable Lugs LV HV Pictured : Cembre 2A Cable Lug alongside Cembre A Cable Lug. The image clearly shows the extended barrel of the Cembre 2A range compared to the shortened barrel of the Cembre A range crimp lugs. Cembre A-M cab... Read More - Cembre Cable Lugs - ...

Category:  LV Cable Jointing & Terminating

Cembre Cable Lugs - Tin Plated Industrial Cable Terminations, Low & High Voltage

By Chris Dodds on 20th February, 2014

Cembre Cable Lugs. Pictured : Cembre 2A24-M12 120sqmm Copper Cable Lug. Cembre tin-plated 2A range cable lug with extended barrel and absence of inspection hole for cable terminations up to 11kV and including 33kV. Tin plated cable lugs provid... Read More - Cembre Cable Lugs - ...

Category:  HV Cable Jointing & Terminating

Elastimold Shrink Fit High Voltage Cable Joints

By Chris Dodds on 20th February, 2014

Elastimold Shrink-Fit High Voltage Cable Joints are designed to joint or splice HV cables in direct-burial, underground or overhead applications. Elastimold Shrink-Fit cable joints feature an automatic core removal without ripcords or heat require... Read More - Elastimold Shrink Fi...

Category:  HV Cable Jointing & Terminating

Roxtec Modules - RM BG & B Modules For Use With Roxtec Cable Transit Frames

By Chris Dodds on 20th February, 2014

Roxtec Cable Transits & Duct Seals   A Roxtec RM sealing module consists of two halves, and has removable layers and a centre core. Due to the Roxtec Multidiameter technology, one single module can seal a cable or pipe over a span o... Read More - Roxtec Modules - RM ...

Category:  Cable Transits & Duct Sealing

QS1000 - At The Heart Of 3M Cold Shrink Cable Joints

By Chris Dodds on 20th February, 2014

3M QS1000 cable joints are a single-piece Cold Shrink joint body made by 3M from a specially formulated silicone material. 3M Cold Shrink provides flexibility, easy installation at low temperatures and superior electrical performance over a wide r... Read More - QS1000 - At The Hear...

Category:  HV Cable Jointing & Terminating

Why Move To 3M Cold Shrink ?

By Chris Dodds on 18th February, 2014

3M Cold Shrink. Over 10 million 3M Cold Shrink products are installed worldwide ; this includes cable joints, terminations and abandonment kits. Developed in the 1970's by 3M, Cold Shrink technology has been found to be a safer, more reliab... Read More - Why Move To 3M Cold ...

Category:  LV Cable Jointing & Terminating

Cable Cleats, Cable Glands & Cable Lugs For Prysmian FP600S Cables

By Chris Dodds on 14th February, 2014

Prysmian FP600S is the ultimate fire resistant, armoured cable for power and control of emergency, life safety and fighting systems used in buildings. FP600S has been designed and developed for the toughest British Standard fire test for cables, B... Read More - Cable Cleats, Cable...

Category:  LV Cable Jointing & Terminating

132kV Cable Tools For Offshore Windfarm Projects

By Chris Dodds on 13th February, 2014

Cable Jointers Tools 132kV Cable Preparation Tools   Using the correct jointers tools to prepare subsea cables before cable jointing and terminating reduces catastrophic cable failures. T&D working with the Cable Engineering Manager... Read More - 132kV Cable Tools Fo...

Category:  HV Cable Jointing & Terminating

Marechal Decontactor Plugs & Sockets - The Advantages Of Butt Contacts

By Pamela Kinnell on 13th February, 2014

  Marechal Plugs & Sockets  Advantages Of Butt Contacts The Marechal decontactor withstands temporary overloads due to starting or frequent restarting of motors, pumps or fans (that generate the longest overload) without any da... Read More - Marechal Decontactor...

Category:  Plugs & Sockets

Power Testing : LV HV Power Cabling, Jointing & Electrical Specialists

By Chris Dodds on 12th February, 2014

Supporting the World with Electrical Solutions and Resources. Power Testing is a U.K. based company with an international client base, offering an unrivalled service within the Electrical Engineering and Contracting Industry. Power Testing are lea... Read More - Power Testing : LV H...

Category:  HV Cable Jointing & Terminating

BT Openreach Approved Cable Cutters - Weidmuller KT55

By Chris Dodds on 11th February, 2014

Weidmuller KT55 Telephone Cable Cutting Tools. Suit Copper Cables. Suit Aluminium Cables. T&D can supply BT Openreach approved Weidmuller cable cutting tools. Maximum values when cutting copper cable stranded core (max. conductor cros... Read More - BT Openreach Approve...

Category:  Cable Crimping & Cutting Tools

< < Newest   |   < Newer   |   Page 54 of 110   |   Older >   |   Oldest > >

UK Time - GMT: