Jointer Training Course : HV6 LoviSil Silicone Filled Single Core XLPE - EPR Straight Joint

By Chris Dodds on 20th April, 2016

Follow @ThorneanDerrick

HV6 Lovink LoviSil Silicone Filled Jointing Course Single Core XLPE - EPR Straight Joint. Tyco Cold Applied Cable End Termination.

Sterling Power training centre is now closed - for up to date information see Cable Jointer Training Courses.

For further reading click here - Cable Joint Training 

Duration - Two days

Venue - Sterling Power Training, Halesowen

Membership - This cable jointing training course is designed for existing 11kV cable jointers.

Cable jointers should have existing jointing skills for 11kV or 33kV cables with XLPE experience both for bonded and easy strip cables.

Maximum number of delegates - Seven cable jointers per course.

Training Course Objectives - By the end of this jointer training course delegates should be able to:

• Demonstrate 11kV sheath removal, screen stripping, insulation and earth wire preparation for both XLPE and EPR cables
• Provided prepared cores ready for cable jointing for both XLPE and EPR cables using Lovink LoviSil cable joints
• Complete a single core 11kV XLPE to EPR straight cable joint using Lovink LoviSil joints
• Demonstrate and complete cable termination using Tyco cold applied termination technology

T&D, the Specialist Distributor of LV-HV Jointing Equipment & Tools are proud supporters and business partners of Sterling Power Group, the UK's leading provider of Cable Jointer Training Courses.

 

HV Jointer Training Course Outline

Day 1

09.00 - 10.00  Welcome and Introduction

Introduction to the course, welcome delegates and understand their experiences and prior knowledge.

Introduction to Lovink LoviSil technology, components, silicone fluid, cable joints and box’s.

10.00 - 10.15  Break

10.15 - 12.00  Cable preparation

 Practical exercise to prepare 185sqmm Triplex XLPE - EPR cables to carry out Lovink straight joint

12.00 - 12.45  Lunch

12.45 - 15.00  Cable Jointing - Practical

Commence practical to make Triplex XLPE - EPR straight joint using LoviSil technologies

15.00 - 15.15  Break

15.15 - 16.30  Cable Jointing - Practical

 11kV Triplex XLPE - EPR Straight Joint (continued)

Day 2

09.00 - 10.00  Cable Jointing - Practical

 11kV Triplex XLPE - EPR Straight Joint (continued)

10.00 - 10.15  Break

10.15 - 12.00  Cable Jointing - Practical

 Completion 11kV Triplex XLPE - EPR Straight Joint

12.00 - 12.45  Lunch

12.45 - 15.00  Cable Jointing - Practical

Commence practical exercise to make 11kV Tyco Cold Applied Termination

15.00 - 15.15  Break

15.15 - 16.00  Cable Jointing - Practical

Completion of 11kV Tyco Cold Applied Termination

16.00 - 16.30  Course Review

Each delegate will be required to bring the following jointing kits and cable:

 

HV Jointing Kits & Other Materials

• 1 x Lovink LoviSil Triplex XLPE to Triplex EPR 11kV Straight Joint Kit including Fluid
• 1 x Tyco Cold Applied 11kV Cable End Termination Kit
• 1 x Fluid Bottle Holding Frame
• 1 x Easy Peel Jointer Tools

 

HV Cable Requirements

• 2m x 185sqmm Triplex XLPE 11kV cable
• 2m x 185sqmm Triplex EPR 11kV cable

 

Further  HV Cable Jointer Courses :

• Jointer Training Course : LV1 Introduction to LV Cable Jointing – Single & Three Phase Services 
• Jointer Training Course : LV2 LV Polymeric (Wavecon) Main Cable Three Phase Jointing Course 
• Jointer Training Course : LV3 LV Transition Polymeric (Wavecon) to PILCSTA Main Cable – Three Phase
• Jointer Training Course : LV4 Polymeric Services to PILSTA Cable Jointing Course
• Jointer Training Course : HV1 HV and LV Cable Terminations Conversion Course
• Jointer Training Course : HV3 Polymeric XLPE and/or EPR up to 11kV
• Jointer Training Course : HV4 11kV Polymeric to Paper Insulated Lead Covered Steel Wire Armoured Cab 
• Jointer Training Course : HV5 33kV Single Core Polymeric XLPE Cable Jointing  
•  

Thorne & Derrick Specialist Electrical Distributor

Established since 1985, T&D distribute the most extensive range of LV, MV & HV Cable Jointing, Terminating, Pulling & Installation Equipment - contact us today for a competitive quotation.

Key Products : MV Joints & Terminations, Cable Cleats, Duct Seals, Cable Transits, Underground Cable Protection, Jointing Tools, Feeder Pillars, Cable Duct, Earthing & Lightning Protection, Electrical Safety, Cable Glands, Arc Flash Protection & Fusegear.

Distributors for : 3M, Pfisterer, Nexans Euromold, Elastimold, Catu, Roxtec, Emtelle, Centriforce, Lucy Zodion, Alroc, Hivotec, Cembre, Prysmian, Ellis Patents, ABB & Furse.

 

Invitation

Thorne & Derrick are inviting you to join LinkedIn’s fastest growing Discussion Group : Low & High Voltage Power, Cabling, Jointing, & Hazardous Area Electricals (LV-HV).

Discussion subjects include cable installations, cable jointing, electrical substation, overhead line and electrical construction at LV, 11kV, 33kV and EHV.

Network, engage and promote your profile, company or products with over 10,000 influencers.

 

Category:  Cable Jointer Training Courses

Go back to blog index