Blog

By Chris Dodds on 19th January, 2016

T&D International are the UK distributor for SPS Rail Cable Joints which were originally developed for London Underground Ltd (LUL) and are now specified throughout the global rail industry. This range includes zero halogen heat shrink ca... Read More - Video Training - Joi...

Category:  Rail


By Chris Dodds on 14th January, 2016

Socomore PF-BR Bitumen Remover Wipes Socomore PF-BR are extra large, heavily saturated electrical cleaning wipes specifically designed for the bitumen removal process during low, medium and high voltage electrical operations. Bitumen removal wi... Read More - Video : How To Remov...

Category:  HV Cable Jointing & Terminating


By Chris Dodds on 14th January, 2016

Cable Cleaning. Socomore PF-BR Bitumen Remover Wipes. Socomore ( formerly PT Technologies) bitumen removal wipes for cables (subsea and submarine), umbilicals and subsea electrical equipment including cable rollers and ROV's - used by ... Read More - Video : How To Remov...

Category:  HV Cable Jointing & Terminating


By Chris Dodds on 14th January, 2016

Image: John Penny Cable Jointer / Director at CableTec Services Pictured: 11kV Cold Applied Tyco Transition Straight Joint - despite the typical muddy cable trench conditions note the careful attention to cable cleanliness achieved by th... Read More - 11kV Cold Applied Ty...

Category:  Cable Jointing - PhotoBlog


By Chris Dodds on 8th January, 2016

Oil & Gas UK recently revealed that North Sea costs for decommissioning are expected to rise to £35 billion in the next 25 years. The following infographic guide by Claxton Engineering provides all the key details from the report and loo... Read More - Well Abandonment - A...

Category:  Hazardous Area Electricals & Lighting


By Chris Dodds on 8th January, 2016

Cable socks, sometimes called cable stockings or cable grips provide an efficient method of supporting cables for pulling and laying into open-trench or duct. Cable socks are re-usable tools (subject to inspection before re-use) and are not confin... Read More - Cable Socks - Techni...

Category:  Cable Laying & Cable Pulling


By Chris Dodds on 6th January, 2016

T&D are proud to present a Guest Article from EA Technology's Neil Davies and Paul Blackmore on the importance of assessing the condition of HV cables to reduce network risk which can significantly impact performance. Of all the major asse... Read More - Condition Assessment...

Category:  Electrical Equipment HV


By Chris Dodds on 6th January, 2016

Image: Fredrik Pedersen - HV Cable Jointer / Supervisor at OTERA RATEL. Pictured: 130kV EHV XLPE Cable Pencilled Using Hivotec Peeling Tool.    NKT Cable Joints & Cable Terminations Overview  • S... Read More - 130kV EHV XLPE Cable...

Category:  Cable Jointing - PhotoBlog


By Chris Dodds on 6th January, 2016

Image: David Young - HV/EHV Cable Jointer at Balfour Beatty Utilities. Pictured: 275kV Fluid Filled Straight Cable Joints.   Further reading  275kV Fluid Filled Cable Cut And Capped After The Cable Pull  ... Read More - 275kV Fluid Filled S...

Category:  Cable Jointing - PhotoBlog


By Chris Dodds on 6th January, 2016

Image: Steve Fielder - HV/EHV Cable Jointer. Pictured: 110kV G&W Cable Termination - HPFF High Pressure Fluid Filled "It's a 110kV G&W cable termination, the system is high pressure fluid filled and the cables run ins... Read More - 110kV G&W Cable ...

Category:  Cable Jointing - PhotoBlog


By Chris Dodds on 6th January, 2016

Image: Fredrik Pedersen - HV Cable Jointer / Supervisor at OTERA RATEL. Pictured: 130kV Ericsson (NKT) Transition Cable Joint (EHV).    NKT Joints & Terminations Overview  Self-supporting outdoor c... Read More - 130kV Ericsson (NKT)...

Category:  Cable Jointing - PhotoBlog


By Chris Dodds on 6th January, 2016

Image: Barrie Gray (High Voltage Electrical Fitter). Pictured: 33kV 4000amp Fully Insulated Duresca Busbar System On Dudgion Offshore Platform. The cables that come from the turbine array strings are routed into the 33kV panelboard. The... Read More - 33kV 4000amp Fully I...

Category:  Cable Jointing - PhotoBlog


By Chris Dodds on 6th January, 2016

Image: Danny Williamson - LV/HV Cable Jointer. Pictured: 11kV Cooper Connectors Terminating MV Power Cables Onto GBE Transformer. Cooper Power Connectors - MV-HV Specifiers Guide 5kV-35kV     Further reading 3... Read More - 11kV Cooper Connecto...

Category:  Cable Jointing - PhotoBlog


By Chris Dodds on 6th January, 2016

Image: Richard Huston - High Voltage Cable Splicer at IBEW Local 17. Pictured: 345kV HPFF USI Full Stop Joint To Okonite 3500 KCM Cable. Richard Huston has 14 years experience of high voltage cable splicing/jointing up to 345kV. &nb... Read More - 345kV HPFF USI Full ...

Category:  Cable Jointing - PhotoBlog


By Chris Dodds on 6th January, 2016

Image: Andrew Brezovszky EHV Cable Jointer at Energex Australia. Pictured: Tyco Raychem Heat Shrink Pole Termination On 33kV LAT Cable With Pothead Earths. 33kV LAT cable 1000sqmm aluminium conductor terminated outdoor using Tyco/Raychem h... Read More - Tyco Raychem Heat Sh...

Category:  Cable Jointing - PhotoBlog


< < Newest   |   < Newer   |   Page 16 of 110   |   Older >   |   Oldest > >