![]() |
|
home | contact | team t&d | group websites | markets | exports | blog |
![]() |
|
Cable Jointing, Terminating, Abandoning, End Sealing Cables - 3M Cold Shrink.
3M Electrical Products provide solutions for the cable jointing, terminating, abandonment and end sealing of multi-core power cables up to 3.3kV. This Video Set provides the Electrical Engineer & Contractor with instructive guidance and advice for managing low voltage cable installations using 3M Cold Shrink technology.
3M LV Cold Shrink Cable Jointing Kits suitable for cable types XLPE/PVC/EPR Insulation, Lead Sheath, Steel Wire Armour (SWA), Galvanised Steel Wire Braided (GSWB) and Phosphur Bronze Wire Braided (PBWB) Cables rated 0.6/1kV up to 1.9/3.3kV. Watch 3M Cold Shrink Cable Joint Video......
3M LV Cold Shrink Cable Termination Kits suitable for 3 core cable types XLPE/PVC/EPR Insulation, Lead Sheath, Steel Wire Armour (SWA), Galvanised Steel Wire Braided (GSWB) and Phosphur Bronze Wire Braided (PBWB) Cables rated 0.6/1kV up to 1.9/3.3kV. Watch 3M Cold Shrink Cable Termination Video......
3M Cold Shrink Cable Abandonment Kits (CSCAK) Kits are suitable for XLPE (SWA steel wire armoured) and EPR (GSWB galvanised steel wire braided) insulated cables, including single and multicore cables with lead sheath, 600/1000v and 3.3kV.
3M CSCAK cable abandonment kits (live cable end seals) are used to temporarily or permanently seal power, control and instrumentation cables - especially the abandonment of redundant or decommissioned low voltage offshore and shipwiring cables. Watch 3M Cold Shrink Cable Abandonment Video......
3M Cold Shrink Cable End Caps environmentally seal and mechanically protect exposed low and high voltage cable ends using no tools, mastics or tapes - excellent for quick and easy cable end capping in the field without resort to heat shrink gas torches and bottles. Watch 3M Cold Shrink Cable End Seal Video......
Category: LV Cable Jointing & Terminating