3M Cold Shrink Cable Termination Kits - Low Voltage Termination Kits

3M Cold Shrink Cable Joints & Cable Terminations

3M Cold Shrink Cable Jointing Kits

3M LCT Cold Shrink Cable Termination Kits

3M LV Cold Shrink Cable Termination Kits suitable for 3 core cable types XLPE/PVC/EPR Insulation, Lead Sheath, Steel Wire Armour (SWA), Galvanised Steel Wire Braided (GSWB) and Phosphur Bronze Wire Braided (PBWB) Cables rated 0.6/1kV up to 1.9/3.3kV.

3M LV Cold Shrink Cable Termination Kits - Benefits:

• Simple installation – no special jointing tools required
• No torches or heat required with Cold Shrink termination kits
• Safe installation - replaces heat shrink cable terminations
• Accommodates a wide range of cable sizes
• Improved tough rubber formulation withstands rough backfilling
• Resistant to acids, alkalis, ozone, UV light, and fungus
• Waterproof cable termination seal

Nominal Conductor Area	3M Cold Shrink Termination Kit Ref	Accepted Cable Diamteer Over Lead Sheath(CFS) Minimum - Maximum	Accepted Cable Diameter Over Insulation (PST) Minimum - Maximum
35 sqmm	LCT/1	23.5mm - 37mm	16mm - 33mm
50 sqmm	LCT/1	23.5mm - 37mm	16mm - 33mm
70 sqmm	LCT/2	31mm - 50mm	16mm - 33mm
95 sqmm	LCT/2	31mm - 50mm	16mm - 33mm
120sqmm	LCT/2	31mm - 50mm	16mm - 33mm
150sqmm	LCT/3	44mm - 70mm	19mm - 40mm
185sqmm	LCT/3	44mm - 70mm	19mm - 40mm
240sqmm	LCT/4	TBA	TBA
300sqmm	LCT/4	TBA	TBA
400sqmm	LCT/4	TBA	TBA

3M Cold Shrink cable termination kit list - cold shrink tubes, earth continuity for lead sheathed cables, electrical tape, 3 core cold shrink cable breakout boot - kit excludes cable lugs (compression or mechanical shearbolt) and cable gland.

3M Cold Shrink cable termination kits offer faster, safer and simpler installations without the dangers and hassles of “hot-working” - no naked flames, no gas torches, no ignition tooling, no “hot-work” permit applications.

3M Cold Shrink Cable Termination Kits - Low Voltage Termination Kits

Cold Shrink Terminations, 3M LCT 3 Core LV Polymeric Cable Terminations - NEW Datasheet