Get Your Popcorn...3M Joints & Terminations, Starring Scotchcast & Cold Shrink, The Movie

By on 21st June, 2013

Follow @ThorneanDerrick

Scotchcast & Cold Shrink - Cable Jointing & Cable Terminating Solutions from 3M

Our vital 3M Cable Jointing statistics...

* 32 videos
* 1 hour, 30 minutes runb time
* 1,394 views

Low voltage joints in either Scotchcast Resin or Cold Shrink from 3M.....

3M Scotchcast resin (470W) cable joints are designed to cable joint multi-core armoured (SWA or GSWB), polymeric (XLPE EPR) low voltage power cables - 3M cable joints provide electrical insulation and mechanical protection with either compression or mechanical connectors - 3M LVI-1 power cable joints have now replaced the 3M LA range of cable joints.

3M LV Cold Shrink cable jointing kits suitable for cable types XLPE/PVC/EPR Insulation, Lead Sheath, Steel Wire Armour (SWA), Galvanised Steel Wire Braided (GSWB) and Phosphur Bronze Wire Braided (PBWB) Cables rated 0.6/1kV up to 1.9/3.3kV. Cold shrink cable jointing kits are suitable for jointing cables indoor, outdoor, overhead or installed in cable trays - this includes both onshore and offshore cable jointing applications.

......and for the High Voltage Cables, 3M Cold Shrink Joints and Terminations....

3M Cold Shrink high voltage cable terminations (QT111) and cable joints (11kV QS1000, 24kV QS2000, 33kV QS111) offer faster, safer and simpler installations without the dangers and hassles of “hot-working” - no naked flames, no gas torches, no ignition tooling, no “hot-work” permit applications.

3M Cold Shrink high voltage cable joints and cable terminations suit single and 3-core polymeric (XLPE, EPR, Triplex) and paper cables (PILC) with copper tape/ copper wire screens, SWA (wire amoured) or SWB (wire braided) up to 33kV.

1 Hour 30 Minutes of 3M Cable Jointing, 3M Cable Terminating, 3M Cable Abandonment indulgence.... 

Category:  HV Cable Jointing & Terminating

Go back to blog index