Blog

3M Cold Shrink Low Voltage Inline Splice Joint Kits 5730 5731 For TECK-90 Cables

By Chris Dodds on 9th April, 2014

3M Cold Shrink Low Voltage Inline Splice Joint Kits 5730 5731 For TECK-90 Cables from Thorne & Derrick (Power Products) Tel 00 44 191 4901547 ... Read More - 3M Cold Shrink Low V...

Category:  LV Cable Jointing & Terminating

Centritile Cable Tile Underground Cable Protection LV-11kV

By Chris Dodds on 28th March, 2014

Ex Stock. Centritile Cable Warning & Protection Tape for Underground Low Voltage & High Voltage Power Cables up to 11kV. Centritile cable warning tape tile is rolled out into the cable trench by cable laying contractors for quick and easy ... Read More - Centritile Cable Til...

Category:  Cable Laying & Cable Pulling

Cable Socks & Supports for Pulling Subsea Cables & Offshore Umbilicals

By Chris Dodds on 28th March, 2014

T&D have supplied 50off Open Ended Cable Grips (Lace Up) type to suit 120mm diameter subsea cables. The cable socks were made to order and delivered to the site office of Harwich Navyard Wharf, Essex within 5 days. The Rigging Supervisor for Subs... Read More - Cable Socks & Su...

Category:  Cable Laying & Cable Pulling

SEB FW3000 Cable Pulling Winch for Power Cables (3 Tonne)

By Chris Dodds on 28th March, 2014

SEB FW3000 Cable Pulling Winch. LV HV Cable Pulling. Power Cable Pulling Winches - Download   Today, T&D Exports working with the Sudan Ministry of Electricity & Dams (DIU) have secured a £25,500.00 order for the supply o... Read More - SEB FW3000 Cable Pul...

Category:  Cable Laying & Cable Pulling

Cable Drum Trailers Up to 50,000Kg Capacity

By Chris Dodds on 28th March, 2014

Cable Drum Trailers  LV HV EHV Cables In December 2009, Balfour Beatty Utility Solutions (BBUSL) approached SEB for a cable drum trailer to cope with a hgh voltage cable drum, which weighed 50,000kg. The cable laying and pulling project... Read More - Cable Drum Trailers ...

Category:  Cable Laying & Cable Pulling

Umbilical Cable Grips

By Chris Dodds on 28th March, 2014

T&D Exports have serviced another requirement for Cable Grips -  working with the Senior Installation Engineer, Subsea Division of Technip Malaysia, T&D have supplied double eye Lace Up Cable Grips to suit a safe working load of 5 Tonne.... Read More - Umbilical Cable Grip...

Category:  Cable Laying & Cable Pulling

Cable Drum Trailers & Electric Cable Pulling Winches For Rail Cables

By Chris Dodds on 28th March, 2014

Network Rail have procured 4 off SEB CD32 Cable Drum Trailers and 4off Electric Cable Pulling Winches this week from T&D to enable fast and safe rail cable installations on several upcoming ECML projects. The cable drum trailers and cable... Read More - Cable Drum Trailers ...

Category:  Rail

3M Cold Shrink QS-III Inline Splice Kits 35kV

By Chris Dodds on 28th March, 2014

3M Cold Shrink QS-III Inline Splice Kits 35kV - 5467A, 5467A-WG, 5468A, 5468A-WG from Thorne & Derrick (Power Products) Tel 00 44 191 4901547   The 3M Cold Shrink QS-III Splice Kits 5467A, 5467A-WG, 5468A and 5468A-WG are 35kV cl... Read More - 3M Cold Shrink QS-II...

Category:  HV Cable Jointing & Terminating

Heat Shrink Cable Repair Kits For Damaged BS6883 Offshore Cables

By Chris Dodds on 27th March, 2014

Working with Anixter, T&D are supplying Heat Shrink Cable Sheath Repair Kits to reinstate and repair cable damage to BS6883 offshore cables (600/1000 volts low voltage) - during installation of the offshore type cable (BS6883) the&... Read More - Heat Shrink Cable Re...

Category:  LV Cable Jointing & Terminating

3M Cold Shrink Tubes For Subsea & Underwater Surveys

By Chris Dodds on 26th March, 2014

3M Cold Shrink Tubes are extensively used to provide waterproof seals in the subsea industry for several key reasons. T&D stock a complete range of 3M Cold Shrink Tubes in both EPDM rubber and silicone. Installed by hand - no specialist too... Read More - 3M Cold Shrink Tubes...

Category:  LV Cable Jointing & Terminating

Schneider : Medium Voltage Equipment Design Guide

By Chris Dodds on 26th March, 2014

Medium Voltage Design Guide - Schneider. This guide helps you to carry out the calculations required to define and determine equipment dimensions and provides useful information enabling Electrical Engineers to design MV switchboards.   ... Read More - Schneider : Medium V...

Category:  Electrical Equipment HV

3M Scotch 27 Glass Cloth Tape

By Chris Dodds on 21st March, 2014

3M Scotch Glass Cloth Tape 27 is edge-tear resistant, comformable, abrasion resistant for use as a coil cover, anchor, banding and core, layer and crossover insulation. 3M Scotch 27 tape is used for heat-stable insulation for furnace and oven cont... Read More - 3M Scotch 27 Glass C...

Category:  3M Scotch Tapes

Cleaning High Voltage Electrical Equipment

By Chris Dodds on 20th March, 2014

Cleaning High Voltage Electrical Equipment : Screened Separable Connectors. High Voltage Cable Terminations. "Blooming" (discolouration) is caused by the by-products used in the manufacturing process of the high voltage cable connect... Read More - Cleaning High Voltag...

Category:  HV Cable Jointing & Terminating

Abtech Electrical Enclosures & Junction Boxes : Major International Project List

By Chris Dodds on 20th March, 2014

Abtech are global market leaders in the design and manufacture of Industrial, Hazardous Area and High Voltage Electrical Enclosures & Junction Boxes. T&D specify and distribute Abtech Enclosures servicing worldwide utilities, power, constr... Read More - Abtech Electrical En...

Category:  Hazardous Area Electricals & Lighting

Cable Rollers Guide & Protect Offshore Cables

By Chris Dodds on 19th March, 2014

  Cable Rollers Guide & Protect Offshore Cables Cable Pulling & Laying Equipment     T&D have supplied 250 x HSP125 Straight Cable Rollers, 30 x CR5 Corner Cable Rollers and 25 x CR6 Vertical Cable ... Read More - Cable Rollers Guide ...

Category:  Cable Laying & Cable Pulling

< < Newest   |   < Newer   |   Page 50 of 110   |   Older >   |   Oldest > >

UK Time - GMT: