Switchboard & Switchgear Rubber Insulating Matting

Rubber Insulating Matting 

BS921, ASTM, D178, VDE0303, IDE6001

Electrical Safety Switchboard Rubber Matting

Electrical switchboard rubber safety matting to BS921, ASTM, D178, IDE61111, VDEO303 specifications, including oil resistant electrical safety matting.

Electrical switchboard rubber safety matting is available in various cut lengths, widths and thicknesses - T&D UK can provide full rolls or singular cut mats.

Electrical switchgear safety matting prevents electrical shocks whilst working on open or live LV-HV switchgear and electrical equipment including 3.3kV, 6.6kV, 11kV, 15kV, 20kV and 33kV systems.

The Factories Acts and Health & Safety at Work Acts require the provision of permanent insulation to prevent electrical shock danger to persons employed in the generation, transformation and distribution of electricity. Electrical matting is the recommended safety flooring at switchboards, substations, transformers and electrical workbenches. 

Pictured : Insulating Matting. Electrical insulating matting is available in choice of roll lengths or customised to suit switchroom floor configuration.

All electrical safety rubber matting products are vigorously tested to comply with the relevant standards and are manufactured using only the finest rubber compounds - the quality of these electrical switchboard mats is essential in complying with and maintaining electrical safety working standards.

Insulating rubber matting is increasingly stipulated for electrical safety by UK DNO's for cable jointing applications - use of insulating rubber matting while jointing cables provides a secondary level of protection in the event of insulating gloves being damaged during use.

Pictured : Insulating Matting. Rubber insulating matting provides electrical protection for working on LV, MV and HV switchgear, switchboards, motors and transformers.

NOTE : Electrical rubber matting exhibiting surface cracks or punctures should be replaced immediately.

	Switchgear Matting - Insulating Rubber Electrical Safety Matting - 11kV Tested 450v Working
	Switchgear Matting (BS921)- Electrical Safety Rubber Matting - 15kV Tested, 650v Working
	Switchgear Matting (ASTM D178) - Electrical Safety Matting - 20kV Tested, 7.5kV Working
	Switchgear Matting (ASTM D178) - Electrical Safety Matting - 30kV Tested, 17kV Working
	Switchgear Matting (VDE0303) - Electrical Safety Rubber Matting- 50kV Tested, 1000v Working
	Military Switchboard Matting - USA Dept of Navy
	CATU Electrical Safety Catalogue 2009-2010
	CATU Electrical Safety Equipment for LV-HV Substations Switchgear
	CATU Substation & Switchgear Safety - Rail, Metro & Tram Systems
	LV-HV Switchgear & Electrical Safety - HSE Guide