ASTM D178 Matting 20kV Tested 7.5kV Working Voltage Type 2 Class 1 Mats

Insulating Matting

ASTM D178 Electrical Safety Rubber Matting

Tested Voltage 20kV

Working Voltage 7.5kV

SM556-01 Electro Safe

Electrical switchgear rubber matting fully tested to ASTM D178 / ANSI JS.7 Type 2 Class 1 standards including full testing over the entire mat surface and stamped on the reverse every 100cm with identification coding.

SM556-01 electrical insulating matting is installed in 11kV high voltage switchrooms and substations to prevent against electric shock.

High voltage switchgear matting can be supplied in standard roll lengths or cut to suit substation or switchroom floor requirements in accordance with ASTM specifications.

ASTM Standards - Standard Specification for Rubber Insulating Matting

ASTM D149 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies

An extremely high specification, high quality, high voltage electrical safety insulating matting to withstand the following :

• Electrical Rubber HV Matting - Dielectric Test to 20kV
• Electrical Rubber HV Matting - Surface Proof Test to 10kV
• Electrical Rubber HV Matting - Working Voltage 7.5kV

ASTM Electrical Matting Stock Sizes (4.5mm Thick)

• ASTM Matting - HV Electrical Matting 10m x 0.91m rolls ex stock
• ASTM Matting - HV Electrical Matting 10m x 1.2m rolls ex stock
• ASTM Matting - HV Electrical Matting 22.86m x 0.91m rolls ex stock
• ASTM Matting - HV Electrical Matting 22.86m x 1.2m rolls ex stock

Fine Ribbed Rubber Matting to ASTM D178 Type 2 Class 1 

• Working Voltage Test 7.5 kV

7.5kV Insulating Matting

Matting Thickness	Roll Size 10m x 0.91m	Roll Size  10m x 1.2m	Roll Size 22.86m x 0.91m	Roll Size 22.86m x 0.91m	Weight/sqM kgs Approx	Tested Voltage	Working Voltage
4.5mm	Ex Stock	Ex Stock	Ex Stock	Ex Stock	5.20	20kV	7.5kV

 

SM556-01 Electrical Insulating Matting Specification

• Colour : Black
• Hardness : 65 shore A
• Density (SG) : 1.25
• Tensile Strength : 5.0Mpa
• Elongation : 300%
• Temperature Range : -20/+70 Degrees Celsius
• Abrasion Resistance : 180mm3

7.5kV Working / 20kV Tested Voltage - Insulating Matting Details

• Application: Insulating Matting for Substations/Switchgear/Electrical Safety
• Thickness: 4.5mm
• Resistance to: Please call T&D
• Colour: Black
• Insert Requirements: No
• Solid: Yes
• Drainage Holes: No

T&D distribute LV, MV & HV insulating matting and electrical safety equipment for use in substations, switchrooms, overhead line and underground cable installations including 6.6kV, 11kV, 33kV and 66kV-132kV voltages.

ASTM D178 Matting 20kV Tested 7.5kV Working Voltage Type 2 Class 1 Mats