Wibe Cable Ladders

By Chris Dodds on 16th May, 2013

Follow @ThorneanDerrick

Wibe Cable Ladders.

Wibe offer one of the broadest ranges of cable ladder on the market today, with a common side profile the Wibe cable ladders common accessories for both mounting and joining.

The Wibe cable ladder is based around a unique connection system that dramatically reduces the number of fixings required. The average time for joining Wibe cable ladder lengths together is around 30 seconds.

The standard Wibe cable ladders all have the unique Wibe hexagon shaped side profile and are available in a variety of widths (150, 200, 300, 400, 500, 600, 800 and 1000mm). Part of the range is available with two types of rungs, round or profile shaped. The standard length of Wibe cable ladder is 6m with some of the offer available in 3m lengths.

Wibe cable ladder comes in four finishes: pre-galvanised, hot dip galvanised, stainless steel and an epoxy coating.

There are a complete range of supports for wall mounted, floor laid and ceiling suspended installations. Accessories such as bends, risers and reducers are quickly connected to the lengths with the standard joint; this reduces the number of special jointing references to a minimum.

Category:  Electrical Safety & Arc Flash

Go back to blog index