Panduit Stainless Steel Pan-Steel Cable Ties & Strapping

By Chris Dodds on 7th January, 2013

Follow @ThorneanDerrick

Panduit Cable Ties

Panduit Pan-Steel Stainless Steel Fully Coated Cable Ties

 

Panduit Pan-Steel stainless steel system provides strong, reliable solutions for use in indoor, outdoor, and direct burial applications. These stainless steel systems provide applications for bundling, fastening, and permanent identification in harsh environments.

Panduit Pan-Steel Stainless Steel System Features & Benefits

• Reliable system performance - Delivers strength, long life and resistance to chemicals, vibration, radiation, weathering, and extreme temperatures.
• Increased job site safety - Features rounded edges to prevent installer injury and damage to cable bundles or finished product.
• Lowest installed cost - Includes reliable, ergonomic tooling and an innovative cable tie design to provide fast and reliable installation.
• Effectively identified workplace - Offers the most comprehensive selection of on-site and factory custom marking products in the industry.
• Standards compliance - Meets and exceeds the most stringent industry standards

 

Panduit stainless steel cable ties perform exceptionally well in temperature, chemical, and environmental extremes. Stainless steel ties are recommended for harsh environment and general purpose applications where strength and/or resistance to severe conditions are required.

Cable tie selection depends on the resiliency of the object in your application. Panduit MLT ties are ideally suited for resilient cable bundling applications. Panduit MRT application ties, MRS ties and strapping are recommended for non-resilient Mechanical Fastening Applications

Panduit Pan-Steel Stainless Steel Self-Locking Cable Ties

Part No.	Material	Length	Width	Min. Loop Tensile Strength		Application
Panduit MLT2S-CP	304SS	201mm	4.6mm	200lbs	890N	Identification, extra corrosion resistance
Panduit MLT2S-CP316	316SS	201mm	4.6mm	200lbs	890N	Identification
Panduit MLT4S-CP	304SS	362mm	4.6mm	200lbs	890N	Identification, extra corrosion resistance
Panduit MLT4S-CP316	316SS	362mm	4.6mm	200lbs	890N	Identification
Panduit MLT2H-LP	304SS	201mm	7.9mm	450lbs	2000N	General Purpose, Aerial support, Identification
Panduit MLT2H-LP316	316SS	201mm	7.9mm	450lbs	2000N	Cable tray (indoors/outdoors)
Panduit MLT4H-LP	304SS	362mm	7.9mm	450lbs	2000N	General Purpose, Aerial support, Identification
Panduit MLT4H-LP316	316SS	362mm	7.9mm	450lbs	2000N	Cable tray (indoors/outdoors)
Panduit MLT4EH-LP	304SS	434mm	12.7mm	600lbs	2670N	Aerial support, Cable tray (indoors/outdoors)
Panduit MLT4EH-LP316	316SS	434mm	12.7mm	600lbs	2670N	Cable tray (indoors/outdoors)
Panduit MLT6EH-LP	304SS	594mm	12.7mm	600lbs	2670N	Aerial support, Cable tray (indoors/outdoors)
Panduit MLT6EH-LP316	316SS	594mm	12.7mm	600lbs	2670N	Cable tray (indoors/outdoors)
Panduit MLT8EH15-LP	304SS	754mm	12.7mm	700lbs	3115N	Pipe insulation
Panduit MLT12EH15-Q	304SS	1072mm	12.7mm	700lbs	3115N	Pipe insulation
Panduit MLT4SH-LP316	316SS	434mm	15.9mm	900lbs	4005N	Shipboard Cable Bundling
Panduit MLT6SH-LP316	316SS	594mm	15.9mm	900lbs	4005N	Shipboard Cable Bundling
Panduit MLT6DSH-Q316	316SS	1054mm	15.9mm	1200lbs	5340N	Double Loop short circuit – up to 71.5kA
Panduit MLT8DSH-Q316	316SS	1359mm	15.9mm	1200lbs	5340N	Double Loop short circuit – up to 71.5kA

 

Panduit Pan-Steel Stainless Steel Retained Tension Cable Ties

Part No.	Material	Length	Width	Min. Loop Tensile Strength		Application
Panduit MRT2H-L4	304SS	287mm	7.9mm	400lbs	1780N	Heat Shields and General Mechanical
Panduit MRT4H-L4	304SS	447mm	7.9mm	400lbs	1780N	Heat Shields and General Mechanical

 

Panduit Pan-Steel Stainless Steel 360°C Radial Seal Retained Tension Cable Ties

Part No.	Material	Length	Width	Min. Loop Tensile Strength		Application
Panduit MRS1S-C4	304SS	269mm	4.4mm	180lbs	800N	Rubber Boots, Hoses
Panduit MRS4S-C4	304SS	470mm	4.4mm	180lbs	800N	Rubber Boots, Hoses
Panduit MRS1.5H-L4	304SS	246mm	6.4mm	225lbs	1000N	Rubber Boots, Hoses
Panduit MRS4H-L4	304SS	470mm	6.4mm	225lbs	1000N	Rubber Boots, Hoses

 

Panduit Pan-Steel Fully Coated Stainless Steel Self-Locking Cable Ties

Part No.	Material	Length	Width	Min. Loop Tensile Strength		Application
Panduit MLTFC2S-CP316	Coated 316SS	201mm	4.6mm	100lbs	445N	Cable tray (indoor/ outdoor), Telco backbone
Panduit MLTFC4S-CP316	Coated 316SS	362mm	4.6mm	4100lbs	445N	Cable tray (indoor/ outdoor), Telco backbone
Panduit MLTFC2H-LP316	Coated 316SS	201mm	7.9mm	250lbs	1112N	Cable tray (indoors/outdoors)
Panduit MLTFC4H-LP316	Coated 316SS	362mm	7.9mm	250lbs	1112N	Cable tray (indoors/outdoors)
Panduit MLTFC4EH-LP316	Coated 316SS	434mm	15.9mm	300lbs	1335N	Shipboard Cable Bundling
Panduit MLTFC6EH-LP316	Coated 316SS	594mm	15.9mm	300lbs	1335N	Shipboard Cable Bundling
Panduit MLTFC4SH-LP316	Coated 316SS	434mm	15.9mm	450lbs	2000N	Shipboard Cable Bundling
Panduit MLTFC6SH-LP316	Coated 316SS	594mm	15.9mm	450lbs	2000N	Shipboard Cable Bundling

 

• Further Reading

Invitation

Thorne & Derrick are inviting you to join LinkedIn’s fastest growing Discussion Group : Low & High Voltage Power, Cabling, Jointing, & Hazardous Area Electricals (LV-HV).

Discussion subjects include cable installations, cable jointing, electrical substation, overhead line and electrical construction at LV, 11kV, 33kV and EHV.

Network, engage and promote your profile, company or products with over 10,000 influencers.

Panduit Pan-Steel Cable Ties Strapping Stainless Steel Guide

Category:  Cable Cleats & Cable Ties

Go back to blog index