PADS Approval For 3M Cold Shrink Rail Termination 95-EB62-2 (Cat 054/064142)

By Chris Dodds on 20th January, 2015

Follow @ThorneanDerrick

PADS Approval 3M Cold Shrink Termination 95-EB62-2 (Cat 054/064142).

3M 95-EB62-2.

3M Cold Shrink High Voltage Cable Joints and Cable Terminations carry Network Rail approvals for 6.35/11kV, 25kV and 19/33kV polymeric power cables. Prysmian 25kV single core power cables are used to carry 25kV electrical power supplies from Network Rail track-side switching stations to the overhead line equipment on A.C. electrified lines.

T&D UK provide on-going 25kV cable jointer training either in house or on site for 3M Cold Shrink joints and terminations.

High Voltage Rail Cable Joints & Cable Terminations - 6.35/11kV, 12.7/22kV and 19/33kV cables distribute three phase A.C. electrical power supplies at nominal system voltages of 11kV, 22kV and 33kV to Network Rail traction substations on D.C. electrified lines. 25kV two core concentric cables are mainly used to deliver 25kV single phase electrical power supplies, typically, to Network Rail feeder stations on A.C. electrified lines.

25kV single core cables are mainly used to carry 25kV electrical power supplies from Network Rail track-side switching stations to the overhead line equipment on A.C electrified lines - T&D stock 25kV cold shrink cable joints and terminations for all these rail cable applications.

T&D are Link-up Registered and Approved Vendors to Network Rail and TfL London Underground (LU).

3M 95-EB-62-2 Cold Shrink Single Core Termination (26kV 45kV 52kV Cable) - Network Rail PADS

Category:  Rail

Go back to blog index