Cooper Power 600 Amp High Voltage Deadbreak Connector Installation Video

By Chris Dodds on 25th March, 2013

Follow @ThorneanDerrick

HV High Voltage Cable Terminations.

Discover how to install a 600 A deadbreak connector onto cable.

The Cooper Power Systems 600 A, 15kV Class BT-TAP Deadbreak Connector is used to terminate high-voltage underground cable to transformers, switches, switchgear and other apparatus. It is designed for use with unthreaded compression connectors, to easily retrofit existing 600 A BOL-T installations or in new installations where a 200 A interface is required and where the system will not need to be frequently operated. BT-TAP connectors are designed for use on solid dielectric cable (XLPE or EPR) with extruded semi-conductive shields and concentric neutral, with or without a jacket. Installation on jacketed concentric neutral cable may require additional sealing material. Cold shrinkable adapters are available for tape shield, linear corrugated, unishield, and drain wire cables for use with deadbreak connectors.
 

Category:  HV Cable Jointing & Terminating

Go back to blog index