Tailor Made for Cable Jointers : Non-Conductive Tape Measures

By Chris Dodds on 2nd December, 2013

Follow @ThorneanDerrick

Non Conductive Tape Measures for Cable Jointing

Made to Measure Cables Safely. There are no metal parts within this tape measure preferred by cable jointers  - the tape measure is not insulated but non-conductive. The tape measure will not hold a current therefore can be used in all sorts of electrical and cable installations up to 20kV. The cable jointers tape measure is made from the highest quality FRP material, that will not stretch, enabling the measuring tape to last for several years of steady use. Proof tested to 20kV the cable jointers tape is proving to be an invaluable pocket tool in the utilities industry the world over - ideal for LV, 3.3kV, 6.6kV and 11kV cable jointers tool boxes.

£34.84 each plus VAT & Postage & Packing  (Order Ref CLY 111 001)

 

Looking for Cable Installation Tools ?

Cable cutting tools for power, control, instrumentation cables (SWA)
Cable crimping tools copper/aluminium cables (hydraulic, battery, ratchet)
Cable spiking tools for LV-HV cables (cartridge/hydraulic)
Heat shrink gas torches for LV-HV jointing
Screen scoring tools for bonded/easy peel HV cables
Outer sheath stripping tools, LV-HV cables
Insulation (XLPE) stripping tools, HV cables
Insulated tools for live-working
Cable rollers, socks, jacks and pulling equipment
Conduit duct rods -  look no further, all ex stock T&D

Non Conductive Tape Measures for Cable Jointing - Data Sheet

Category:  LV Cable Jointing & Terminating

Go back to blog index