3M Cold Shrink Barrier Bushing Boots, High Voltage Cables

3M Cold Shrink Barrier Bushing Boots, High Voltage Cables

11kV Cold Shrink Terminations

3M Cold Shrink Barrier Bushing Boots, High Voltage Cables

3M 92-EE717-1 Cold Shrink Boots

3M Cold Shrink High Voltage Bushing Boots accomodate and insulate HV bushings of cast resin and porcelain type with diameters 40-70mm used in conjunction with 3M Cold Shrink terminations for power cables up to 15kV (including 6.6kV and 11kV cable networks).

3M Cold Shrink Bushing Boots increase insulation between phases within high voltage cable boxes and are installed in switchgear with air insulated cable termination boxes.

3M Cold Shrink high voltage, universal, cold-fit, push on bushing boots provide essential encapsulation of the metallic connection against ambient influences between the high voltage switchgear/transformer bushing and cable termination.

Barrier bushing boots provide anti-tracking minimising leakage currents in wet indoor conditions.

3M Cold Shrink bushing boots are used on indoor high voltage power cable terminations rated up to 15kV with extruded insulations of polyethylene (PE), cross linked polyethylene (XLPE) and ethylene propylene rubber (EPR) and aluminium or copper conductors.

3M HV boot kits are installed in high voltage switchgear and transformer cabe end boxes.

Also - HV High Voltage Bushing Boots Up to 33kV (Heat Shrink)

Adobe 3M Cold Shrink Barrier Bushing Boots, High Voltage Cables - 3M 92EE717-1