Prysmian Draka Cables - Bostrig 125 Type P Signal IO P 16AWG & 14AWG AS Cable

Prysmian Draka Cables - Bostrig 125 Type P Signal IO P AS

Individual and Overall Shielded Multipair / Armoured and Sheathed

600V or 0.6/1kV 16AWG & 14 AWG

Prysmian Draka Offshore Drilling Cables 

Prysmian Draka Cables - Bostrig 125 Type P Signal IO P AS Cable Applications

Prysmian Draka Bostrig 125 Type P Signal IO P Marine and Offshore Cable is primarily designed for power, control, signal and instrumentation applications for offshore, land rigs, marine vessels and oil and gas drilling rigs. 

Bostrig 125 Type P Signal IO P cables have excellent resistance to oil, abrasion, moisture, sunlight and ester-based mud (Type P-MR). 

The Bostrig Type P Signal IO P has standard insulation which has a continuous operating temperature of 125ºC allowing for higher ampacity levels. Larger diameter cables carry a new flexible design.

The Bostrig Signal IO P cables satisfy Transport Canada’s cold bend at -40ºC and cold impact at -35ºC (CSA C 22.2 No. 0.3). The Prysmian Draka Bostrig 125 Type P Signal IO P cable is readily available in an unarmoured version.

Prysmian Draka Cables - Bostrig 125 Type P Signal IO P AS Cable Approvals

• ETL/Intertek Testing Services Listed as Marine Shipboard Cable in accordance with IEEE 45 (1998), IEEE 1580 (2001), UL 1309/CSA245 and the performance requirements of IEC 60092-3
• Det Norske Veritas Type Approval Certificates E8792,  E8793, E8794, E8795 and E8796
• American Bureau of Shipping Approval Certificate  03-HS347018C/3-PDA
• Lloyds Registry of Shipping Approval Certificates  No. 95/00161(E3) and 95-00162(E3)
• Transport Canada Approved AMS400-20-2 

T&D distribute Prysmian Draka marine and offshore cables with Lloyds Register, DNV GL and NEK 606 standards. 

Prysmian Draka Cables - Bostrig 125 Type P Signal IO P AS Cable Construction 

1. Conductors Soft annealed stranded tinned copper per ASTM B 33. A polyester tape separator is used over the conductor

2. Insulation Bostrig Type P chemically cross-inked polyolefin (XLPO), meeting IEEE 1580 (2001)

3. Shield An aluminum/polyester tape with drain wire, 100% coverage, is applied over each twisted pair and the cabled core. The single pair construction has only the overall shield

4. Jacket Flame-retardant Arctic Neoprene, complying with Type N Neoprene as required in IEEE-1580 (2001)

5 Armour Braided bronze in accordance with IEEE 1580 (2001)

6. Sheath Flame-retardant Arctic Neoprene applied over the armor, complying with Type N Neoprene as required in IEEE 1580 (2001)

Prysmian Draka Cables - Bostrig 125 Type P Signal IO P AS Cable Features

Superior resistance to oil, abrasion, moisture, sunlight, mud, crush and impact
Meets IEEE standards for 600V / IEC standards for 0.6/1kV

T&D supply the complete range of Prysmian cable glands, cable cleats and cable joints suitable for industrial and hazardous area LV, MV & HV cable installations - this includes FP Fire Resistant cables.