Prysmian Draka Cables - Bostrig 125 Type P Mud Resistant Power 2000V 4/0AWG Cable

Prysmian Draka Cables - Bostrig 125 Type P Mud Resistant Power Cable

Single Conductor / Armoured & Sheathed and Unarmoured Ester-Based

Mud Resistant Cable 2000V 4/0 AWG TO 1111 MCM

Prysmian Draka Offshore Drilling Cables 

Prysmian Draka Cables - Bostrig 125 Type P MR Power Cable Applications

Prysmian Draka Bostrig 125 Type P Mud Resistant Cable is primarily designed for power, control, signal and instrumentation applications for offshore, land rigs, marine vessels and oil and gas drilling rigs.

Instead of Polychloroprene (Neoprene), the Bostrig MR power cables are sheathed in our proprietary  elastomeric formulation which is not only mud-resistant but qualifies as a low-smoke zero-halogen (LSZH) cable in accordance with IEEE 45 (1998), IEEE 1580 (2001) and type approved as Type M. 

This mud-resistant jacket is designed for use in areas where ester-based drilling muds and fluids are present. These Prysmian Draka Bostrig 125 Type P Mud Resistant cables are listed by ETL in accordance with IEEE 45 and type approved by DNV as resistant to NOVA Plus, Petrofree LE and Petrofree drilling muds and  fluids.

The Bostrig 125 Type P MR Power cable was tested in accordance with NEK 606 for 56 days at 70ºC in each of the ester-based muds mentioned above. The Bostrig 125 Type P MR Power cable can be manufactured in an unarmoured version.

Prysmian Draka Cables - Bostrig 125 Type P MR Power Cable Approvals

• ETL/Intertek Testing Services Listed as Marine Shipboard Cable in accordance with IEEE 45 (1998), IEEE 1580 (2001), UL 1309/CSA245 and the performance  requirements of IEC 60092-3
• Performance requirements of IEc 92-3.
• Det Norske Veritas Type Approval Certificates E8797, E8798, E8799 and E8800

T&D distribute Prysmian Draka marine and offshore cables with Lloyds Register, DNV GL and NEK 606 standards. 

Prysmian Draka Cables - Bostrig 125 Type P MR Power Cable Construction

1. Conductors Soft annealed tinned copper per ASTM B 33. A mylar separator is used over the conductor

2. Insulation Bostrig Type P chemically cross-inked polyolefin (XLPO), meeting IEEE 1580 (2001)

3. Armour Braided bronze in accordance with IEEE 1580 (2001)

4. Sheath Flame-retardant XLPO applied over the armour, meeting requirements of Type L in IEEE 1580 (2001)

Prysmian Draka Cables - Bostrig 125 Type P MR Power Cable Features

• Special ester-based mud-resistant jacket also provides superior resistance to oil, abrasion, moisture, sunlight, crush and impact
• Super-flexible construction
• Meets IEEE 45 (1998) and IEEE 1580 (2001) for 600 and 2000 volts

T&D supply the complete range of Prysmian cable glands, cable cleats and cable joints suitable for industrial and hazardous area LV, MV & HV cable installations - this includes FP Fire Resistant cables.