Prysmian Draka Cables - Bostrig 125 Type P Power 2C 8AWG AS Cable

Prysmian Draka Cables - Bostrig 125 Type P Power 2C AS Cable

Two Conductor / Armoured and Sheathed Cable 

600V or 0.6/1kV 8 AWG

Prysmian Draka Offshore Drilling Cables 

Prysmian Draka Cables Bostrig 125 Type P Power 2C AS Cable Applications

Prysmian Draka Cables Bostrig 125 Type P Power 2C AS Marine and Offshore Cable is primarily designed for power, control, signal and instrumentation applications for offshore, land rigs, marine vessels and oil and gas drilling rigs.

 Bostrig 125 Type P Power 2C AS cables have excellent resistance to oil, abrasion, moisture, sunlight and ester-based mud (Type P-MR). The Type P Power 2C AS cables are suitable for use in Class I, Division I and Zone I applications (armoured & sheathed) and meet the crush and impact resistance requirements (C&IR) of UL 2225. 

The Prysmian Draka Bostrig AS cables have standard insulation which has a continuous operating temperature of 125ºC allowing for higher ampacity levels. Larger diameter cables carry a new flexible design.

The Prysmian Draka Cables Bostrig 125 Type P Power 2C AS cable satisfies Transport Canada’s cold bend at -40ºC and cold impact at -35ºC (CSA C 22.2 No. 0.3). Bostrig 125 Type P Power 2C AS cable is readily available in an unarmoured version.

Prysmian Draka Cables Bostrig 125 Type P Power 2C AS Cable Approvals

• ETL/Intertek Testing Services Listed as Marine Shipboard Cable in accordance with IEEE 45 (1998), IEEE 1580 (2001), UL 1309/CSA245 and the performance requirements of IEC 60092-3
• Det Norske Veritas Type Approval Certificates E8792, E8793, E8794, E8795 and E8796
• American Bureau of Shipping Approval Certificate 03-HS347018C/3-PDA
• Lloyds Registry of Shipping Approval Certificates No. 95/00161(E3) and 95-00162(E3)
• Transport Canada Approved AMS400-20-2

T&D distribute Prysmian Draka marine and offshore cables with Lloyds Register, DNV GL and NEK 606 standards. 

Prysmian Draka Cables Bostrig 125 Type P Power 2C AS Cable Construction

1. Conductors Soft annealed stranded tinned copper per ASTM B 33. A polyester tape separator is used over the conductor

2. Insulation Bostrig Type P chemically cross-inked polyolefin (XLPO), meeting IEEE 1580 (2001)

3. Jacket Flame-retardant Arctic Neoprene, complying with Type N Neoprene as required in IEEE-1580 (2001)

4. Armour Braided bronze in accordance with IEEE 1580 (2001)

5. Sheath Flame-retardant Arctic Neoprene applied over the armour, complying with Type N Neoprene as required in IEEE 1580 (2001)

Prysmian Draka Cables Bostrig 125 Type P Power 2C AS Cable Features

• Superior resistance to oil, abrasion, moisture, sunlight, mud, crush and impact
• Super-flexible at 4/0 AWG and larger
• Meets IEEE standards for 600 & 2000V / IEC standards for 0.6/1kV

T&D supply the complete range of Prysmian cable glands, cable cleats and cable joints suitable for industrial and hazardous area LV, MV & HV cable installations - this includes FP Fire Resistant cables.