CSD RISE Insert Sleeves - Bulkhead Assembly Instructions

A60 H120 Fire Proof Cable & Pipe Sealing for Fire Rated Bulkheads & Decks

CSD RISE Duct Seals - Save Time, Space & Weight

DNV & Lloyds Register Approved for Marine Offshore Pipe & Cable Sealing

The recommended method for achieving A60 rated bulkhead seals using CSD RISE insert sleeves.  

Cables can be ducted through the conduit opening in a random order. After ducting the cables, a RISE insert sleeve is applied around each cable. The remaining free space in the conduit is then filled with RISE empty sleeves.

The insert sleeves are pushed into the conduit pipe in such a way as to leave 20 mm free space at the front. Insert sleeves with circular profiles can be applied to mark the position of insert sleeves to be used for later extensions. A 20 mm thick layer of FIWA sealant is then applied at each side of the conduit. The conduit should be overfilled because some sealant will be pushed between and into the empty sleeves during finishing.

To smooth the surface, a cloth that is sprayed with soapy water is used to press down the layer of FIWA. The FIWA sealant between the cables is pressed down and smoothed with a spatula or putty knife. When smoothing is finished a last check should be taken if sufficient sealant is applied in between the cables.

CSD RISE Insert Sleeves - Cable & Pipe Sealing Systems