Prysmian SF6 GIS Terminations - 72.5 to 525kV

Prysmian SF6 GIS Terminations - 72.5 to 525kV

Prysmian SF6 GIS Cable Terminations, designed for Gas Insulated Switchgear (GIS) are cable terminations for polymeric cables are based on Pre-moulded Stress Cones and are currently available for HV polymeric cables from 72.5kV up to 525kV. Because of outstanding electrical and mechanical properties, ethylene-propylene rubber (EPR) is the chosen material for the rubber mouldings. Each moulding is mechanically and electrically tested before leaving the factory.

Prysmian SF6 GIS Cable Terminations are designed for direct connection to High Voltage and Extra High Voltage switching devices (e.g. circuit breakers) which use SF6 as an arc-quenching medium. Within the pre-moulded stress cones, the cable ends are encased in a specially designed epoxy resin insulator which is fastened within the GIS enclosure by a retaining flange.

T&D distribute an extensive range of Extra High Voltage Cable Terminations, Cable Plugs & Cable Connection Systems for high voltage polymeric (XLPE EPR) and paper (PILC) insulated cables - 3M Cold Shrink Terminations, Prysmian Heat Shrink Terminations, SPS Heat Shrink Terminations, Nexans Screened Separable Connectors and Pfisterer Inner Cone Plugs compatible with air and gas insulated switchgear and oil filled switchgear and transformers manufactured by ABB, Siemens, Eaton Alstom, Brush, Schneider and Hawker Siddley. High voltage electrical system designers and contractors should be attentive to the short circuit forces generated by high voltage power cables and select cable cleats to provide cable support and containment - Ellis Patents Cable Cleats provide reliable cable cleating of high voltage and extra high voltage cables, 11-33kV up to 400kV.

Prysmian SF6 GIS Terminations 72.5kV to 525kV