CATU HV Insulating Rubber Gloves

CATU HV Insulating Rubber GlovesInsulating Gloves & Boots

CATU HV Insulating Electricial Safety Gloves

Class 1, 2, 3 & 4 Rubber Insulated Gloves

CATU's high voltage (HV) electrical safety insulating gloves conform to IEC 60903 for high safety performance at Class 1 (7.5kV), Class 2 (17kV), Class 3 (26.5kV) and Class 4 (36kV).

Pictured: CATU HV Insulating Rubber Gloves

CATU HV Insulating Rubber Gloves

Hot Glove Working for the Utilities

DNO hot glove teams, overhead linesmen and high voltage cable jointers need insulating gloves to carry out tension insulator replacement, pin insulator replacement, conductor repairs, binder replacement, pole and cross arm changes, jumper connection and disconnection, installation of plant, flying sections and ABI's to minimise outage areas.

Hot glove working enables essential maintenance and repair to overhead lines without taking cutomers off electricity supply - hot glove working significantly reduces power outage periods relative to traditional shutdown. 

CATU HV Insulating Rubber Gloves
Part Ref Class Voltage Category Total Length Colour

CATU CG-1-(**)-NR

1 ≤7500V RC 360mm Bi:colour - red outside, natural inside

CATU CG-2-(**)-NR

2 ≤17,000V RC 360mm Bi:colour - red outside, natural inside

CATU CG-3-(***)-NR

3 ≤26,500V RC 360mm Bi:colour - red outside, natural inside

CATU CG-4-(****)-NR

4 ≤36,000V RC 410mm Bi:colour - red outside, natural inside

 

(**Sizes 07-12, *** 08-12, **** 09-12)

Video: CATU Insulating Gloves - Dexteri+ IEC 60903 Gloves 

Adobe CATU HV Insulating Rubber Gloves