Heat Shrink Live Pot End Kits, Single & 3 Core XLPE & PILC Cables, 6.6-11-33kV

Where high voltage cable circuits need to be installed and energised in the ground but not immediately used to connect to HV transformers or HV switchgear T&D UK can produce customised Cable Pot End Kits using heat shrink technology. This maybe done at a later stage when perhaps an extension to a building/factory is undertaken and the previously installed cable circuits can then be utilised. A live pot end joint kit is a reliable method of terminating a cable which will be left live. An extensive range of Heat Shrink Live Pot End Kits are available.

If high voltage cables are left in the ground and must be sealed but not energised, Cable Abandonment Kits can be supplied. From the outside cable abandonment kits look similar to live pot end kits but internally, the phases are connected to earth so that if voltage is applied to the cables by mistake, an immediate earth fault occurs, tripping out the circuit breaker.

Video: Heat Shrink Live Pot End Joint (HV) - ) - 11kV Single Core XLPE BS7870 Cables

Adobe Heat Shrink Live Cable Pot End 11kV 3 Core XLPE SWA - Instruction

Adobe Live Pot End Kits, Single & 3 Core XLPE & PILC Cables, 6.6-11-33kV

UK Time - GMT:

Heat Shrink Live Pot End Kits, Single & 3 Core XLPE & PILC Cables, 6.6-11-33kV