A-Belco Feeder Pillars - Network Rail Approved for Trackside Power & Signalling Systems

Feeder Pillars

A-Belco

Network Raill Approved Feeder Pillars

A-Belco Stainless Steel Feeder Pillars and Cubicles are Network Rail NR/SP/ELP/40045 Issue 5 approved and are used to provide low voltage electricity distribution to trackside signalling systems, lighting and points.

The feeder pillars are single or double sided depending on trackside restriction for meter readings.

Two types are available - DNO feeder pillar for trackside power supply and distribution and FSP feeder pillar for signalling systems.

Pictured: A-Belco Feeder Pillars - Network Rail Approved for Trackside Power & Signalling Systems

A-Belco Feeder Pillars - Network Rail Approved for Trackside Power & Signalling Systems - Specification

• Feeder Pillar - 316 stainless steel
• Internal Enclosures - Mild steel, GRP
• IP Rating - IP54
• Cable Entries - Bottom
• Options - Busbar jointing, gland plates, cable spreader boxes, RAL finish
• Voltage - 5 phase (230V Ac) or 3 phase + N (400V Ac)
• Current Ratings - 100amp, 200amp, 400amp
• Modules - MCB, MCCB, fuse boards, transformers, contactors
• Isolators - 32amp to 800amp, 3 or 4 pole
• Fuse Switches - 32amp to 800amp, 3 or 4 pole
• Fault Rating - Maximum 36KA for 1 second

A complete range of 7 sizes stainless steel feeder pillars are available to suit all low voltage electrical distribution requirements.

T&D UK supply an extensive range of Network Rail (PADS) approved cable accessories and electrical equipment. 

A-Belco Feeder Pillars - Network Rail Approved for Trackside Power & Signalling Systems