Hubbell Power Systems 200Amp Loadbreak Elbows 35kV

Hubbell ElbowsElastimold Elbows

Hubbell Power Systems

35kV 200 Amp Loadbreak Elbows

 

Hubbell Power Systems have revised the design of the 35kV 200 Amp loadbreak elbow to increase the cable termination range that the high voltage elbow will accomodate. Hubbell Power Systems new design meets IEEE Standards 386 and 592 and are fully interchangeable with manufacturers products that also comply to IEEE Std. 386.

One Hubbell Power Systems loadbreak elbow will accomodate 35kV cables sized 1/0 compact/sold through 4/0 stranded with insulation diameters from 1.020" to 1.310".

Hubbell Power Systems loadbreak elbows are available with or without test points to enable safe and efficient maintenance and service of high voltage power cables.

 

35kV 200 Amp Loadbreak Elbows - Hubbell Power Systems Features

 

  • Molded External Shield  - 1/8-inch thick, peroxide-cured EPDM conductive jacket is abrasive resistant and is an integral component of the deadfront design.

 

  • EPDM Insulation - peroxide-cured provides superior stress-relaxation characteristics and assures long life under high-ambient temperatures. Compatible with all solid dialectric cable insulations and shields.

 

  • Molded Conductive Insert - controls electrical stress and shields the compression connector.

 

  • Operating Eye - permits energized loadmake / loadbreak operations with suitable hot-stick tool. Designed and tested to withstand 500-pound static pull and 10 ft-lb torsion forces.

 

  • Compression Lug - meets all requirements of ANSI C119.4 for Class A connectors.

 

  • Test Point - optional capacitive test point allows for the installation of faulted circuit indicators and will indicate the presence of voltage when interrogated with a high-impedance device.

 

  • Cable Entrance - the semi-conductive rubber continues the cable's insulation shield and helps control internal stress. The interference fit along the cable insulation surface provides proper creep distance and dialectric strength.

 

  • Grounding Tabs - provides a means to connect a drain wire to ensure deadfront construction.

 

  • White-Black-White ID Band - identifies elbow as having a 3Ø rating for switching and fault-close.

 

  • Operating Interface - designed to mate with any component manufactured to the requirements of IEEE Std. 386.

 

  • Locking Ring - secures the elbow to mating product. Initial pull-off force required to unseat from mating groove in bushing insert produces fast break necessary for loadbreak switching.

 

  • Loadbreak Probe - tin-plated copper body mates with ArcMate™ ablative material follower tip. Provides current path and reliable loadmake/loadbreak switching operations.

Adobe Hubbell Power Systems 200Amp Loadbreak Elbows 35kV

UK Time - GMT:

Hubbell Power Systems 200Amp Loadbreak Elbows 35kV