Cable Rollers - Straight Line Cable Rollers DR1

SEB InternationalCable Rollers

SEB DR1 Draw Off Roller

Low & High Voltage Power Cables

Cable Trench & Cable Duct Pulling 

 

A cable roller for positioning in front of the cable drum to lead the cable directly into the trench - this cable roller is 1020mm wide to span right across the cable trench entrance.

A very heavy duty lead in cable roller where the design allows the LV or HV cable to be supported over the full drum width prior to it being pulled into the cable trench.

Pictured: SEB DR1 Draw Off Roller

SEB DR1 Draw Off Roller

SEB DR1 Draw Off Roller - Technical Specification
Height Width Length Weight
220m 178mm 1066mm 14kg

 

To lead the cable directly from the drum into the trench. 75mm diameter steel tube roller on low friction sintered bushes. All mounted to heavy duty angle steel base.

Cable Pulling in Trench - Horizontal Cable Runs

Cable pulling contractor should ensure cable to be pulled in (LV or HV) should be supported on free running cable rollers with no projections or sharp edges to prevent snagging and subsequent cable sheath damage.

Straight cable rollers shall be placed in the cable trench to prevent the LV-HV cable from dragging on the cable trench bottom or in mud. The cable roller spacing required to achieve this will depend on the cable type being installed and the pulling tension along the route.

A leading roller should be used to support the cable over the entire cable drum width immediately before being pulled into the trench.
 

Adobe Cable Laying & Pulling Equipment for Trench - SEB Catalogue

Adobe Straight Line Cable Rollers - Cable Roller Ref DR1

UK Time - GMT:

Cable Rollers - Straight Line Cable Rollers DR1