11kV Branch Joints

11kV Branch Joints - 3 Core XLPE, PILC, PICAS High Voltage Cable Joints

11kV branch joints, resin-filled are suitable for HV cable jointing of 3 core polymeric (XLPE) and paper insulated (PILC, PICAS) power cables - this includes 11kV 3 core copper tape screened XLPE and EPR cables, belted or screened PILC and PICAS cables. 11kV branch joints are available to joint new 11kV Triplex (BS7870) cables onto existing 3 core 11kV PILC (BS6480) and 3 core 11kV XLPE (BS6622) cables.

11kV branch joints suit 3 core XLPE, PILC and PICAS cables with 16sqmm, 25sqmm, 35sqmm, 50sqmm, 70sqmm, 95sqmm, 120sqmm, 150sqmm, 185sqmm, 240sqmm and 300sqmm aluminium or copper conductors.  

11kV Branch Cable Joints - Features : 

Mechanical Connectors - 11kV conductor jointing (copper or aluminium, stranded or solid) is easy to achieve with shearbolt mechanical connectors. Made from aluminium alloy with removable bridge piece to aid conductor insertion while final connection is achieved through torque controlled shearbolts. HV connectors conform to IEC 61238 and BS4579.

Connector Housing - 11kV branch joints feature a unique design whereby high voltage insulation re-instatement and stress control are provided by a quick fit rubber housing, The incorporation of a semi-conducting layer integral to the dual construction housing effectively removes high concentrations of electrical stresses at the connector interface.

Earth Fault & Screen Protection - 11kV branch joint includes punched aluminium earth cage installed over the jointed cores providing both earth fault continuity and effective earth screening for Completed 11kV branch cable joint has undergone short circuit testing and readily meets requirements of CENELEC - HD629.2, UK Electricity Council Recommendation ERC90 and Kema 52.

Polyurethane Resin Encapsulation - 11kV branch joint is encapsulated with quick-mix, fast-flow 2 part cable jointing resin providing water ingress resistance and high impact strength.

Branch Joint Shell - 11kV branch joint shells are vacuum formed for high strength retention of high voltage cable jointing resin - cold pour resin cable joints require no hot pour compounds to complete the cable joint installation.

11kV Pot-End Joints to suit 3 core XLPE, PILC and PICAS cables are available.

T&D supply 3M, WT Henley, ABB, CTL Clearcast, ISP, Prysmian, SPS and Raychem cable joints for low and high voltage cable jointing - resin cable joints, cold shrink cable joints and heat shrink cable joint kits are available from stock for high voltage 11kV-33kV installations.

11kV Branch Joints - 3 Core XLPE PILC & Triplex Joints

11kV Branch Joints - XLPE/PILC/Triplex - HV Jointers Instruction

3M Cold Shrink High Voltage Cable Joints - Brochure

3M Cold Shrink Terminations & Cable Joints - 3M Selection Guide (HV)