Prysmian Draka Cables - Bostmarine Type LSX LSZH 16AWG 600V Signal Cable

Prysmian Draka Marine Cables

Bostmarine Type LSX Signal Cable

Individual and Overall STP / LSZH/ Unarmoured & Armoured

16AWG 1.31sqmm / 600V

Offshore Marine Cables - NEK 606/BFOU/RFOU/BU/RU topside cable including halogen-free, fire resistant and mud resistant LV, MV & HV power cables (3.3kV, 6.6kV and 11kV).

Prysmian Draka Cables

Bostmarine Type LSX 16AWG 600V Signal Cable Applications

Prysmian Draka Bostmarine Type LSX 600 volt signal cables are suitable for use in commercial marine applications where low smoke/zero halogen flame retardant cables having excellent physical and electrical properties are required. The insulation system of the Bostmarine LSX cable has a continuous operating temperature of 90°C.

Prysmian Draka Bostmarine LSX signal cables meet all test requirements of IEEE 45 (1998), IEEE 1580 (2001), UL 1309 and the Flame Test in IEC 60332-3, Category A. The LSX signal cables are listed by ETL, a nationally recognized testing laboratory, per IEEE 45 (1998), IEEE 1580 (2001) and UL 1309/CSA 245 for 600 volts. Prysmian Draka Type LSX cables are approved by ABS.

Aluminum and bronze armoured versions are available. Optional outer PVC sheath available upon request.

Prysmian Draka Cables

Bostmarine Type LSX 16AWG 600V Signal Cable Approvals

ETL/Intertek Testing Services Listed as Marine Shipboard Cable in accordance with IEEE 45 (1998), IEEE 1580 (2001), UL 1309/CSA 245 and the performance requirements of IEC 60092-3 for 0.6/1 kV

American Bureau of Shipping Approval Certificate No. B315003-X

Meets all test requirements of IEEE 45 (1998), IEEE 1580 (2001), UL 1309/CSA 245 (1995) First Edition and the Flame Test in IEC 60332-3, Category A

Prysmian Draka Cables

Bostmarine Type LSX 16AWG 600V Signal Cable Construction

• Conductor - Soft annealed bare copper per ASTM B 3 and B 8
• Insulation - Bostmarine Type LSX thermosetting low smoke cross-linked polyethylene meeting specifications IEEE 45 (1998), IEEE-1580 (2001), UL 1309 X90 and J-512
• Pair Shield - Aluminium / polyester tape with tinned copper drain wire to provide 100% coverage over the twisted pair, covered with a polyester tape
• Jacket - Flame-retardant thermoplastic low smoke polyolefin is applied over the cable core (cov- ered with a polyester separator tape) and complies with Type TPO thermoplastic low smoke polyolefin as required in IEEE 45 (1998) and UL 1309 Type TPE

T&D distribute the complete range of Prysmian cable joints, cable cleats and cable glands to support the installation of LV, MV & HV cables.