Clifford & Snell - Yodac V4 Beacon, Hazardous Area ATEX Zone 1 & 2 Beacons (Flashing)

Clifford & Snell - Yodac V4 Beacon, Hazardous Area  ATEX Zone 1 & 2 Beacons (Flashing)

Clifford & Snell - Beacons (Strobes), Sounders (Horns) & Manual Call Points

Clifford & Snell V4 IS "Flashing" Beacon - Xenon Strobe

Intrinsically Safe, Hazardous Area (ATEX) LED "Flashing" Beacons

Yodac V4 Hazardous Area Beacon - Main Features

  • BASEEFA (ATEX) Approved LED beacon
  • ATEXHazardous area Zones 0, 1 & 2 certified beacons
  • EEx ia IIC T4 rated beacon
  • 8 LED array allows condition or status alert in flashing mode
  • High light intensity beacon
  • Long life LED design beacon
  • Beacon flash rate 1 per second
  • Reliable and simple to install hazardous area beacon
  • Red/white flame retardant ABS plastic enclosure
  • Anti static enclosure and lens
  • Up to 4 modules in any combination of lens colour ranging from Red, Amber, Green, Opal, Blue & Clear
  • Each beacon should be wired independently 

Pictured: Clifford & Snell - Yodac V4 Beacon, Hazardous Area  ATEX Zone 1 & 2 Beacons (Flashing)

Clifford & Snell - Yodac V4 Beacon, Hazardous Area  ATEX Zone 1 & 2 Beacons (Flashing)

Clifford & Snell - Yodac V4 Beacon, Hazardous Area ATEX Zone 1 & 2 Beacons (Flashing) - Technical Specification
Operating Voltage 12VDC, 18VDC, 24VDC via ATEX approved barriers
Operating Temperature Range -20ºC to +40ºC
Storage Temperature Range -40ºC to +70ºC
Relative Humidity 90% at 40ºC
Ingress Protection IP65
Weight Single - 0.15kg, Double - 0.3kg, Triple - 0.45kg, Quad - 0.6kg
Certification EEx ia IIC T4, for use in Zones 0, 1 and 2

 

Pictured: Clifford & Snell - Yodac V4 Beacon, Hazardous Area  ATEX Zone 1 & 2 Beacons (Flashing) - Dimensions Illustration

Clifford & Snell - Yodac V4 Beacon, Hazardous Area  ATEX Zone 1 & 2 Beacons (Flashing) - Dimensions Illustration

Yodac V4 Hazardous Area Beacons & Alarms - Mounting

All hazardous area beacons are supplied seperate from the back box for ease of installation. The back box should be mounted to a reasonably flat surface or bulkhead.

A gasket is suppled for uneven surfaces or wet condition installations. The beacon installation is completed by fitting the beacon onto the back box with screws.

R StahlClifford & Snell, including their Yodalex brand of hazardous area sounders and beacons for Zone 1 and Zone 2, has now been acquired by R Stahl.

 

Adobe

Clifford & Snell - Yodac V4 Beacon, Hazardous Area ATEX Zone 1 & 2 Beacons (Flashing)

UK Time - GMT: