 |
 |
 |
|
 |
|
 |
|
 |
|
 |
Alroc Insulation Chamfering Tools-8YR0-NO5 (LHC5)
LV HV EHV Cable Jointing Tools
Alroc Insulation Chamfering Tools
Alroc 8YR0-NO5 (LHC5), 100-140mm Diameter
Alroc insulation chamfering tools enable cylinder and tapered stripping of high voltage single core dry cables. Insulation chamfering tools remove the sharp edge of the high voltage cable insulation where the HV jointing or terminating system requires a tapered finish.
* The insulation cutting angle is fully adjustable by means of a graduated rule.
* Supplied in a wooden box
High voltage cable jointers can cut high voltage cable insulation into a chamfer removing the sharp edge of the removed insulation to avoid any damage to heat shrink, cold shrink or push-on cable terminations and cable joints. The insulation chamfering tools are ideal for the removal of cable insulation on 132kV single core EHV extra high voltage cables.
T&D UK stock and distribute an extensive range of LV-HV Cable Jointing, Preparation, Crimping and Cutting Tools for LV, 11kV, 33kV, 66kV and 132kV - ideal for cable jointers cable preparation steps prior to installing heat shrink, cold shrink or push-on cable terminations or joints.
Alroc Cable Tools for power, telecommunications and fibre optics cable preparation. Alroc cable preparation tools enable the efficient dressing of cables by cable jointers including low voltage (LV, XLPE, PILC, EPR, PVC, waveform, consac) and high voltage (3.3kV, 6.6kV, 11kV, 33kV, Triplex up to 132kV) power cables - this covers the removal and stripping of outer cable sheaths, insulation, semi-conductor screens (bonded and "easy-strip" peelable) and lead cable sheaths prior to cable jointing or terminating with heat shrink, cold shrink or push on type cable joints and cable terminations.
Alroc HV Insulation Chamfering Tools
1323431565.jpg)
