DNV GL Approved Cable Accessories, Joints, Terminations & Connectors from Nexans
Published 06 Oct 2020
Thorne & Derrick distribute DNV GL Approved Cable Accessories manufactured by Nexans including elbow connectors and cable terminations for the reliable distribution of medium and high voltage power in the marine and offshore sectors up to 33kV.
This article and download brochure provides information on DNV GL Certification and the Nexans Euromold products qualified according to this classification society.
Products approved by the DNV GL Certificate are accepted for installation on all vessels classified by DNV GL.
For the full list of Nexans products with DNV GL approvals, please refer to the download.
Power Cable Accessories
DNV GL Approved
Nexans is the leading European manufacturer of prefabricated cable accessories for medium voltage (MV) and high voltage (HV) energy distribution. Products include MV-HV Connectors and Joints & Terminations to connect, splice, repair and maintain medium/high voltage cable and power distribution systems.
Cable Accessories
WITH DNV GL APPROVAL
158LR/G |
Interface A
|
Elbow connector
|
152SR/G |
Interface A
|
Straight connector
|
480TB/G |
Interface C
|
Tee connector
|
484TB/G |
Interface C
|
Tee connector
|
489TB/G |
Interface C
|
Tee connector
|
800PB/G |
Interface C
|
Coupling connector
|
804PB/G |
Interface C
|
Coupling connector
|
809PB/G |
Interface C
|
Coupling connector
|
800SA |
Interface C
|
Surge arrester
|
784TB/G |
Interface E
|
Tee connector with ALU rod
|
784TB/G |
Interface E
|
Tee connector with CU rod
|
909TB/G |
Interface F
|
Tee connector
|
909PB/G |
Interface F
|
Coupling connector
|
900SA |
Interface F
|
Surge arrester
|
AIN |
|
Slip-on termination indoor
|
AFN |
|
Slip-on termination outdoor
|
ITK |
|
Cold-shrinkable indoor termination
|
OTK |
|
Cold-shrinkable outdoor termination
|
MONOi |
|
Heat-shrinkable indoor termination
|
MONOe |
|
Heat-shrinkable outdoor termination
|
MONOi3 |
|
Heat-shrinkable indoor termination
|
MONOe3 |
|
Heat-shrinkable outdoor termination
|
1TTE |
|
Heat-shrinkable outdoor termination
|
1GLT4 |
|
Heat-shrinkable straight through joint
|
D-Series |
|
Mechanical Connector
|
NX-FIRE |
|
Fire protection kit
|
A DNV GL Type Approval Certificate states that the design of a product type is in conformity with specified requirements. The Type Approval Certificate confirms compliance with the DNV GL Rules in force at the time of certificate issuance.
To obtain DNV GL approval, DNV GL experts verify the manufacturing processes for compliance with the Classification rules and further relevant standards. During this verification, the manufacturer has to demonstrate and prove the following 4 qualification criterion for DNV GL Certification to be issued:
- They have suitable facilities for manufacturing, testing and inspection;
- The manufacturing is carried out by qualified personnel;
- Constant monitoring of product quality has been established.
THORNE & DERRICK
Thorne & Derrick are national distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment – servicing businesses involved in cabling, jointing, substation, earthing, overhead line and electrical construction at LV, 11kV, 33kV, 66kV and EHV. Supplying a complete range of power cable accessories to support the installation and maintenance of low/medium and high voltage cable systems:
- Slip-on Cable Terminations
- Cold-shrink Cable Terminations
- Heat-shrink Cable Terminations
- Cable Joints – Heat & Cold-shrink
- Separable Connectors (Euromold)
- Surge Arresters & Switchgear/Transformer Bushings
Key Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV