FEAM Lighting - Hazardous Area & Explosion Proof Lighting

FEAM Lighting - Hazardous Area & Explosion Proof Lighting

FEAM - Lighting, Enclosures & Control Stations

 Zone 1 & Zone 2 Hazardous Area Lighting (ATEX, GOST, IECEx, InMetro)

 

 

T&D are distributors for the FEAM range of Hazardous Area Lighting for installation in potentially explosive atmospheres - FEAM lighting is specified for hazardous areas Zone 1 and Zone 2 (Gases) with international certifications according to ATEX, Inmetro, GOST-R, GOST-K, IECEx and CE.ATEX

Hazardous areas exist where a flammable mixture of gas and air, or dust and air, can be present in sufficient levels and time periods to create a risk of explosion if an ignition source is present - when specifying and installation electrical equipment and lighting in hazardous areas it is essentialFEAM Hazardous Area and Explosion Proof Lighting - Zone 1 Zone 2 to ensure correct levels of explosion protection are observed.

Flammable Gas & Ignition Sources : flammable gases when mixed with air can be explosive. Gases are categorised into 3 Gas Groups (A,B,C) according to the level of explosion risk present. Electrical equipment and lighting is also classified from T1 to T6 according to maximum allowed temperature of the equipment or lighting to prevent ignition of the gas/air mixture in the hazardous area.

Pictured: FEAM Lighting - Hazardous Area & Explosion Proof Lighting 

FEAM Lighting - Hazardous Area & Explosion Proof Lighting

Adobe

FEAM Lighting - Hazardous Area & Explosion Proof Lighting

UK Time - GMT: