SA Equip Flexiheat - Portable ATEX Heater (Zone 1 & Zone 2 Hazardous Areas)

By Chris Dodds on 27th October, 2015

Follow @ThorneanDerrick

Process Heating

Portable Hazardous Area Heaters

Power Output 15kW

Zone 1 & Zone 2 ATEX Certified Heating

 

Pictured : SA Equip

SA Flexiheat SAPH15/400CEA

ATEX Heaters

Mobile & Portable Hazardous Area Heating  

 

Thorne & Derrick are specialist Hazardous Area Electrical Heating Equipment Distributors - we distribute Flameproof, Explosion Proof and Intrinsically Safe equipment for Zone 1, 2, 21 and 22 hazardous area heating.

T&D are UK Approved Distributors for leading manufacturers of electric heating equipment for hazardous areas, including SA Equip.

T&D service the global oil, gas and petrochemical industries with heat tracing and electrical process heating equipment - the demand for portable hazardous area heating includes offshore vessels such as drill ships, jack-up vessels, semi-submersible vessels, offshore barges and floating platforms.  

 

• SA Equip - SA Flexiheat SAPH15/400CEA ATEX Heaters
• Specification & Features

ATEX Certification :         II 2 G c IIB T3     Ex d e IIB T3  Gb

• Input Voltage 400V +/-10%
• Power Output 15kW
• Operating Temperature -20°C to +40°C
• Weight 55Kg (excluding cable)
• Supplied With 10m Braided Cable
• Noise Level 83dbA @ 1 metre
• Start Up Current 29A (400V)
• Run Current 23A (400V)
• Free Airflow 1253cfm (2130m³/hour)
• Air Speed 15.5m/s (51ft/s)
• Dimensions 760mm x 560mm x 560mm
• Diameter 300mm
• Supply Voltage 400V (+/-10%) 3 Ph 50/60 Hz
• Ingress Protection IP65
• Typical Temperature Rise - Approx. 20°C Above Ambient
•  

Video : SA Flexiheat Portable ATEX Heaters

SA Equip ATEX heaters are tough, compact, powerful, user friendly and easily moveable around jobsite.

 

Typical Applications : 

• Offshore Platforms
• Oil Refineries
• Confined Spaces
• Rental
• Pipeline Maintenance
• Composite Repairs
• Paint Curing or Drying Paint
• Fabric Maintenance

 

Powerful Portable Hazardous Area Heating : Multiple SA Equip Flexiheat Heaters can be configured to provide rapid heat-up with less ducting in the working area and dramatically reduced downtime. 

Multiple heaters reduce downtime considerably with fabric maintenance, paint curing, and composite repair work. A recent client used two SA Equip Flexiheat Heaters coupled side-by-side when carrying out some blasting and painting work on a huge area on the underside of an offshore helideck completing the work task within than an hour rather than the usual full day shift.

"This is the only ATEX heater available where you can attach a duct kit to direct the heat exactly where you need it. Attach a duct to any other ATEX heater on the market today and it immediately invalidates hazardous area certification and warranty," comments Terry McDonald (T&D Sales Manager).

 

Blog : Portable ATEX Heaters – Hazardous Area Heating (Zone 1 & Zone 2 – ATEX Certified) 

 

T&D are also the largest UK stockist and distributor of Drum & IBC Heaters and Heating Jackets :

Pictured : Drum & IBC Heaters

 

 

 

T&D Hazardous Area Electrical Heating - Overview                                                                                                                                 

• Air Heaters
• Heat Tracing Cables
• Immersion Heaters
• Fan Heaters
• Line Heaters
• Water Heaters 
• Surface Heating Mats
• Drum, IBC & Container Heating

 

 

 

SA Equip - SA Flexiheat SAPH15 400CEA ATEX Heaters

Category:  Hazardous Area Electricals & Lighting

Go back to blog index