Heat Shrink Bushing Boots 17.5kV | Straight & Right Angle Boots 17.5KV

Heat Shrink Bushing Boots 17.5kV | Straight & Right Angle Boots 17.5KV

Heat Shrink Bushing Boots

Insulating Boots For Switchgear & Transformer Bushing & Termination Connections

Nexans RAB/SB are heatshrinkable bushing boots that are used to increase creepage distance between the live metal and surrounding metal work and neighbouring phases in switchgear and cable termination boxes  – heat shrink boots are used typically at 6.6kV/11kV but rated up to 17.5kV.

The cable terminations can be energised immediately after installation and the bushing boots have an unlimited shelf life – the bushing boots are designed to mate and protect all types of indoor Cold Shrink or heat shrink cable terminations.

• 6/10 (12) kV
  6.35/11 (12) kV
  8.7/15 (17.5) kV

The Nexans RAB/SB kit comprises 3 heat-shrinkable bushing boots and mastic – where permission to “hot-work” is denied and therefore heat shrink boots cannot be used a range of Cold Shrink boots manufactured by 3M Electrical are available for installation typically in onshore and offshore hazardous area locations with potentially explosive atmospheres.

All bushing boots are supplied as sets of 3 phases – 3 individual boots per set.

Bushing Boots

Nexans RAB/SB

Technical Specification

• Bushing Boot Type – Nexans RAB/SB
• Technology – Heat Shrink
• Voltage Um – 17.5kV max
• Description – Flexible Bushing Boots
• 11kV Switchgear & Transformer Bushing Boots

Heat Shrink Bushing Boots

The following table enables the selection of bushing boots manufactured from heat shrink technology to provide electrical insulation on cable bushings and terminations located in air insulated type cable end boxes and switchgear:

Cable Glands | Screen Earth Kits | Cable Lugs (Crimp Shearbolt) | Bushing Boots | 11kV 33kV

Data Sheets

• Heat Shrink Bushing Boots 17.5kV | Straight & Right Angle Boots 17.5KV
  Download