11kV Cable Terminations, Three Core - 3M Cold Shrink

3M Cold Shrink : High Voltage Cable Joints & Cable Terminations 11kV

3 Core XLPE EPR PILC Cable Terminations 11kV - 3M Cold Shrink QT111

3M Cold Shrink QT111 11kV 3 core high voltage polymeric cable terminations offer faster, safer and simpler cable installations without the dangers and hassles of “hot-working” associated with heat shrink terminations - no naked flames, no gas torches, no ignition tooling, no “hot-work” permit applications.

3M Cold Shrink 11kV 3 Core Polymeric Cable Terminations - Benefits :
*Excellent 3M Cold Shrink electrical insulating performance
*Hydrophobic properties - water and moisture resistant
*Excellent high and low temperature operation
*UV stable for outdoor 11kV cable termination applications
*Non-flammable silicone rubber Cold Shrink termination
*One-piece 11kV cable termination for quick installation
*Built in cold shrink stress control for reliable high voltage service
*Compact design for limited working access in cable end termination boxes

3M Cold Shrink 3 core polymeric cable terminations are suitable for both 6.6kV and 11kV XLPE and EPR insulated cables with copper tape screen (CTS) - this includes BS6622, BS7835 and BS6883 (Marine & Shipwiring) with steel wire armour (SWA) or galvanised steel wire braid (GSWB).

T&D have been Approved 3M Distributors since 1985 with the largest UK stocks of HV Cold Shrink joints and terminations (6.6kV, 11kV, 33kV) for the construction, oil, gas, petrochemicals, rail, renewable energy and utilities.