 |
 |
 |
|
 |
|
 |
|
 |
|
 |
Cable Cleat 2G-11N - 64-70mm
Power Cable Cleats for Single Cables
Cable Cleats - Two Hole Cable Clamps, 2G-11N
Aluminium Cable Cleats Suit 64-70mm diameter cables
Cable Cleat Specifications
Cleat Type - Metallic Aluminium
Dimensions - W134mm, H 84mm, D 64mm
Cleat Fixing Hole - 2 x M10
Impact Resistance - Very Heavy (>6.7kg@300mm)
Service Temperature - -40 to 150 Degrees Celsius
Lateral Load Test - 28000 Newtons (N)
Axial Movement Test - 2000 Newtons (N)
Aluminium cable cleats and clamps are designed to fix, retain and support low and high voltage cables. In addition, where short-circuit cable faults are anticipated, correct cable cleat selection will result in the containment of the cables during a fault and enable the circuit to be restored once the fault has been repaired.
When adjacent cables carrying three phase current suffer a short circuit cable fault, the induced magnetic fields result in the cables experiencing significant opposing forces - a safe electrical cable installation requires well designed and thoroughly tested cable cleats.
Ellis Patents aluminium two bolt hole cable cleats and clamps are recommended for higher specification cleats installed in temperatures of -40 to + 150 Degrees Celsius.
Cast aluminium alloy cable cleats in plain LM6 aluminium to BS1490 for dry indoor use or outdoor unpolluted areas - Ellis Patents aluminium cable cleats (two bolt hole) can be epoxy coated for harsher environment installations such as sea air and contaminated conditions.
Aluminium cable cleats with two bolt (M10) fixing holes offer space saving cable support and are designed to be easily stacked - the cable cleat design allows direct fixing onto cable supports including cable channel and ladder.
Ellis Patents two bolt hole aluminium cable cleats and clamps suit cable diameters 51-114mm.
Aluminium two hole cable clamps have been tested in accordance with the European Standard of "Cable Cleats for Electrical Installations" BS EN 50368 : 2003 - Ellis Patents are the global leader in the manufacture of quality, trusted cable cleats.
Aluminium Two Hole Cable Clamps - Ellis Patents Selection Table
Ellis Patents 2 Hole Aluminium Cable Clamps - Press Release July 2011
The electrical substations throughout Lusail City, the new city currently being built on the east coast of Qatar, is to be installed by 20,000 aluminium clamps from cable cleat manufacturer, Ellis Patents. Ellis Patents’ two-hole aluminium cable clamps were specified through the company’s Qatari distributor, Mannai Trading and the latest shipment of cable cleats left the UK in May 2011. Tony Conroy, Ellis Patents export manager, commented, “When complete, Lusail City will be home to over 200,000 people, play host to an estimated 80,000 visitors a year and be one of the host cities for the 2022 FIFA World Cup. All of which means it is amongst the biggest developments in the world today and one that we were eager to be involved with.” A key factor in the order was the benefit that Ellis Patents cable clamps had third party short circuit certification that proved they would withstand the particular demands of the power cable installation. Ellis Patents cast aluminium alloy cable clamps, which are available in one- and two-hole cleat versions, are designed for higher specification projects that call for all metal cable cleats and can be installed for use in temperatures of up to 150°C.
Ellis Patents Aluminium 2 Hole Cable Clamp - 2G-11N
Ellis Patents Cable Cleats - Complete Catalogue
IEC 61914 (2009) No Cheating on Cleating - Ellis Patents
The Dangers of Incorrectly Cleated Cables - Ellis Patents
Cable Cleats for LV-HV Cables in Building Services - Ellis Patents
Aluminium Cable Cleats - Corrosion Analysis of LM6 BS1490 Aluminium
