 |
 |
 |
|
 |
|
 |
|
 |
|
 |
Cable Cleat 1G-21N - 65-71mm
Aluminium Cable Cleats for Low Voltage Power Cables
2, 3 & 4 Core Cable Cleats XLPE/SWA LSF - BS5467 BS6724
Cable Cleats - One Hole Cable Clamps, 1G-21N
Aluminium Cable Cleats Suit 65-71mm Cables
Cable Cleat Specification
Cleat Type - Metallic Aluminium
Dimensions - W 97mm, H 89mm, D 43mm
Cleat Fixing Hole - M10
Impact Resistance - Very Heavy (>6.7kg @ 300mm)
Service Temperature - -40 to 150 Degrees Celsius
Lateral Load Test - 4670 Newtons
Axial Movement Test - 1170 Newtons
Cable Cleat Selection Guide XLPE/SWA/LSF or PVC 600/1000V Cables
4 Core Cable up to 300sqmm
Aluminium cable cleats and clamps are designed to fix, retain and support low (LV) and high voltage (HV) cables. In addition, where short-circuit cable faults are anticipated, correct cable cleat selection will result in the containment of the cables during a fault and enable the circuit to be restored once the fault has been repaired.
When adjacent cables carrying three phase current suffer a short circuit cable fault, the induced magnetic fields result in the cables experiencing significant opposing forces - a safe electrical cable installation requires well designed and thoroughly tested cable cleats.
Ellis Patents aluminium single bolt hole cable cleats and clamps are recommended for higher specification cleats installed in temperatures of -40 to + 150 Degrees Celsius.
Cast aluminium alloy cable cleats in plain LM6 aluminium to BS1490 for dry indoor use or outdoor unpolluted areas - Ellis Patents aluminium cable cleats (single bolt hole) can be epoxy coated for harsher environment installations such as sea air and contaminated conditions.
Aluminium cable cleats with single bolt (M10) fixing holes offer space saving cable support and are designed to be easily stacked - the cable cleat design allows direct fixing onto cable supports including cable channel and ladder.
Ellis Patents single bolt hole aluminium cable cleats and clamps suit cable diameters 13-71mm.
Aluminium single hole cable clamps have been tested in accordance with the European Standard of "Cable Cleats for Electrical Installations" BS EN 50368 : 2003 - Ellis Patents are the global leader in the manufacture of quality, trusted cable cleats.
Aluminium Single Hole Cable Clamps - Ellis Patents Selection Table
