Cable Jacks - Screw Type

Cable Jacks

Screw Type

Cable Drum Lifting Jacks

LV HV Cable Drums

A complete range of screw jacks and cable drum jacks easy to handle and simple to operate. Large baseplate designed to give cable jack stability even on soft ground.

Pictured: SEB Cable Jacks - Screw Type

SJ3 Cable Jacks

• 3 Tonne capacity/pair
• Minimum cable drum diameter 1060mm
• Maximum cable drum diameter 1600mm
• Base plate size 300mm x 300mm
• Weight (pair of cable jacks) 37kgs

SJ6 Cable Jacks 

• 6 Tonne capacity/pair
• Minimum cable drum diameter 1360mm
• Maximum cable drum diameter 1900mm
• Base plate size 460mm x 300mm
• Weight (pair of cable jacks) 45kg

SJ8 Cable Jacks

• 8 Tonne capacity/pair
• Minimum cable drum diameter 1660mm
• Maximum cable drum diameter 2200mm
• Base plate size 600mm x 300mm
• Weight (pair of cable jacks) 76kg

Cable Drum Jacks & Setting Cable Drums Prior to Cable Pulling & Cable Laying - LV HV Cable Pulling Using Cable Jacks

• Carry out site specific risk assessment.
• Always wear appropriate PPE.
• Always push cable drums in the direction of travel.
• Never pull cable drums with back to the direction of travel.
• Push squarely on the cable drum flanges and be aware for any projecting nails in wooden cable drums.
• Always use approved equipment for handling cable drums.
• Never allow cable drums to move in an uncontrolled manner.
• Never position or store a cable drum underneath an overhead line

Cable Laying & Pulling Equipment, Low & High Voltage - Catalogue