 |
 |
 |
|
 |
|
 |
|
 |
|
 |
Screen Scoring Stripping Tools, Alroc LHM2R - Non Bonded Semi Con Screen Remover - 38-60mm
HV High Voltage Cable Jointing & Cable Preparation Tools
Screen Scoring Tools for High Voltage Power Cables
Alroc LHM2R Screen Scoring Tool strips and removes non-bonded, peelable and "easy-strip" semi conductive screens from high voltage cables with 38mm-60mm diameters.
Alroc LHM2R leaves a semi-conductor strip length of 30, 40, 45, 55 or 60mm.
Alroc high voltage screen scoring tools are designed to remove and strip peelable semi-conductor screens. HV screen scoring tools are available in a range of sizes to deal with varying high voltage cable dimensions, this versatile HV jointers tool works by creating a precise spiral incision with an offset circular blade that is pre set to the specified size of cable it is intended to be used on. This ensures that the screen scoring tool will not damage the layers below and results in a perfect surface for efficient high voltage cable jointing.
High Voltage Cables, Semi-Conductive Screen Removal
Damage to the insulation during semi-conductive screen removal - this is probably the number one cause of all cable joint and cable termination failures. Care must be taken when cable jointers are removing the semi-conductive screen, any damage or nick to the cable insulation at this stage will result in creating an unscreened air void. Since the dielectric strength of air is less than that of the XLPE insulation, the concentration of electrical stress in this area will exceed the dielectric strength of air. The air will ionize causing corona discharge to occur. These discharges bombard the surrounding insulation 100 times a second, and will result in cutting through the insulation and ultimate high voltage power cable failure.
Alroc Cable Tools for power, telecommunications and fibre optics cable preparation. Alroc cable preparation tools enable the efficient dressing of cables by cable jointers including low voltage (LV, XLPE, PILC, EPR, PVC, waveform, consac) and high voltage (3.3kV, 6.6kV, 11kV, 33kV, Triplex up to 132kV) power cables - this covers the removal and stripping of outer cable sheaths, insulation, semi-conductor screens (bonded and "easy-strip" peelable) and lead cable sheaths prior to cable jointing or terminating with heat shrink, cold shrink or push on type cable joints and cable terminations.
Alroc HV High Voltage Cable Jointers Tool Box - CNPT240-1-MV
Screen Scoring Tools, Alroc LHM2R - Non Bonded Semi Con Screen Remover - 38-60mm
