Prysmian Optical Fibre Cables For Aerial Installation (12-288 Fibres) To IEC60794

By Chris Dodds on 17th April, 2014

Follow @ThorneanDerrick

T&D - Prysmian Draka Cables Main Distributor.

Prysmian Draka supplies a complete range of marine, offshore oil and gas power, optical fibre, control and instrumentation cables for use on oil platforms and floating oil production units (FPSO). T&D distribute an extensive range of cables from 250V to 33kV - a complete range of underground and aerial marine, offshore oil and gas industry cables to IEEE, UKOOA and IEC specification.

The T&D and Prysmian commercial relationship goes back to the previous century. T&D have distributed the Prysmian Components range of cable joints, cable glands, cable cleats and high voltage cable terminations for several decades. The new relationship will now extend T&D's portfolio to embrace Prysmian Draka Offshore Marine, Oil & Gas cables.

Prysmian Optical Fibre Cables For Aerial Installation (12-288 Fibres) To IEC60794 Specification

• Central Strength Member (CSM) : glass fibre reinforced plastic rod (FRP) coated with polyethylene when needed.
• Loose tube : thermoplastic material, containing optical fibres and filled with a suitable water tightness compound.
• Filler elements : thermoplastic rods.
• Stranding : loose tubes and fillers SZ stranded around the CSM.
• Longitudinal water tightness : water-swellable elements (dry core).
• Dielectric reinforcement : aramid yarns.
• Outer sheath : polyethylene. One ripcord is laid beneath.

 

 

 

T&D YouTube Prysmian Playlist : Prysmian Cables - Joints, Terminations, Glands, Cleats

Prysmian Optical Fibre Cables For Aerial Installation (12-288 Fibres) To IEC60794

Category:  Prysmian FP Cables

Go back to blog index